legacycentral bbs

Jc25 wrote:I haven't been able to make Evoscan work properly, so now I'm taking a look at B10. I dug out my old computer and it only has 15 vga connector. ( link below) I found an adapter that turns a the 15 vga connector to DB9 Female ( link below) I'm wondering if anyone know if this will work?

https://www.google.com/search?q=vga+15+ ... 80&bih=685


http://www.frys.com/product/5088875?sit ... IN_RSLT_PG

Hi,
I've used evoscan w/a '91-'94 turbo ecu, and a '96 ECU (OBD2) thru the SSM (yellow connector above right knee). Logged w/Evoscan and an LC-1 wideband a couple weeks ago on my '96 that I turbo'd.

I use a USB-Serial Cable connected to a Metra connector - search on here.

TD

I can connect to evoscan, however I'm not getting any feedback from 02 sensor and the mass air flow sensor. I'm having issue with smog here and CA, and I'm not getting any feed back from the sensor I need to see.

I'm working with subie gauges and it's picking up all the sensor. However, I'm comparing the values coming out of my multimeter and what I'm seeing on the screen and they don't seem to match up. The other problem is that it's all in German, and I have to translate everything.

ARe you getting an O2 and/or MAF code? And what car do you have?...You can list it in your Sig.

If your O2 is old/unknown replace it.

Td

If you have o Problem with german Language at Subi Gauges, you can use Jecscan.
http://www.alcyone.org.uk/ssm/software.html

That´s a similar Software for Windows, but in English Language. It works on USB like Evoscan and Subi Gauges.
Different Virus Software shows a Warning Massage at the Software Download.
But there is no Virus inside! You can trust it.

LG Tom