Page 1 of 1

bumper fitment question

Posted: Sun Aug 11, 2002 7:17 pm
by Josh Colombo
Ok......got a question for you experts.....

I'm looking at trying to get a turbo legacy bumper for my 90 legacy n/a.

One would assume they would be swappable and everything is cool. Well I did some snooping through the parts list Dave provided a while back. There is different part numbers and mounting brackets and such.

I would like to put a 92-94 turbo legacy bumper on the car, as I like this style better. (I'd figure something out about the turn signals....but that's minor). A 91 turbo bumper is prob closer to fitting.....but still has some things and different brackets. I'm not sure how much I like that one though........

So anyone done this or have any info.

Thanks in advanced

Josh

bumper fitment question

Posted: Mon Aug 12, 2002 3:27 am
by Douglas Hancock
By different parts do you mean the brakets that hold the front fog lights?

bumper fitment question

Posted: Mon Aug 12, 2002 8:47 am
by Josh Colombo
I was thinking....brackets that hold the bumper on. If you take a look at the parts guide http://groups.yahoo.com/group/BC-BFLega ... Sheets.pdf

You'll see the different parts and stuff between the 90-91 N/A legacy, 91 turbo legacy, and 92-94 turbo legacy bumpers and such.

Josh

bumper fitment question

Posted: Tue Aug 13, 2002 6:57 am
by Douglas Hancock
I know the 92-94 are the same other than the aditional braket for the lights. Which bolt on anyway.

bumper fitment question

Posted: Tue Aug 13, 2002 8:27 am
by Josh Colombo
thanks for the comments. I'll have to see about the 90 & 94's.