2002 WRX Turbo and Intercooler
Posted: Sun Sep 01, 2002 2:55 am
I have some good news and some bad. I recently purchased a WRX
turbo and intercooler off of a 2002 model. Unfortunatly the wrx turbo
does not fit due to clearance problems with the turbo intake running
into the intake manifold. But the intercooler did fit with a few
clever tricks by gary grahn. I should have picks available in a week
or so. I also had the headers and uppipe ceramic coated to keep temps
in the engine bay down.
On a sadder note, during all this installation, I changed my oil
with a valvoline synthetic blend and this oil managed to break loose
some build up on my rear main seal and all the oil drained out of my
car on the way home from work today. To fix this requires dropping
the trans so i figure with 150k miles on the oddometer, might as well
replace it as a measure of preventive maintence. Oh well, shit
happens right.
Ian D.
93 Legacy Turbo
turbo and intercooler off of a 2002 model. Unfortunatly the wrx turbo
does not fit due to clearance problems with the turbo intake running
into the intake manifold. But the intercooler did fit with a few
clever tricks by gary grahn. I should have picks available in a week
or so. I also had the headers and uppipe ceramic coated to keep temps
in the engine bay down.
On a sadder note, during all this installation, I changed my oil
with a valvoline synthetic blend and this oil managed to break loose
some build up on my rear main seal and all the oil drained out of my
car on the way home from work today. To fix this requires dropping
the trans so i figure with 150k miles on the oddometer, might as well
replace it as a measure of preventive maintence. Oh well, shit
happens right.
Ian D.
93 Legacy Turbo