Page 1 of 1
Polyurethane Control arm bushings
Posted: Sat May 03, 2003 1:42 pm
by P Bits
Anybody know where I could find Polyurethane Control
arm bushings for a 92 legacy. The only place i could
find them is
http://www.isrperformance.com/main.html
But they are very expencive and they don't seem to
answer their email. I would also like to hear about
places that carry replacement rubber ones.
thanks, ManP
Polyurethane Control arm bushings
Posted: Sat May 03, 2003 10:12 pm
by dean forman_
ManP,
If you find out where to get the bushings, please let me know. I have a 92 Legacy wagon that I want to change over from the stock bushings.
Dean
92 n/a BF
Polyurethane Control arm bushings
Posted: Sat May 03, 2003 11:52 pm
by Josh Colombo
The bushings are all from whiteline.
You may want to email whiteline directly and see if they have a kit that
would replace all your old bushings at a lesser price then buying them
all individually.
However....out of the entire list of bushings there......I probably
wouldn't replace all of them.
Other option you have is take the part numbers and order them from a
vendor with cheaper costs.
Pam @ isr is pretty decent at returning emails. When did you email
them?
Josh
PAM is my friend!
Posted: Mon May 05, 2003 12:32 pm
by subaruracer755@cs.com
i have great luck from her, just put a set of DBA rotors on my car. now i need new pads, more fuel and then more boost im all set...
HOWEVER, the bushings are not al lthe same, i ordered some rear diff bushings that were SUPPOSED to be universal, and the WRX has a smaller rear mount than our cars. but i made em work... so careful with them bushings.