Page 1 of 1
Where does the bov go?
Posted: Tue Oct 21, 2003 12:05 am
by Legacytuner
I just bought an AWIC from NZ and samco hoses for it. After trial fitting it to see what needed to be moved i realized that there is no place for the bov. Can anyone help me out with some info or pics of what they have
done for this
Posted: Tue Oct 21, 2003 3:46 am
by vrg3
I think with the stock AWIC setup the blowoff valve went between the rubber elbow that goes into the compressor inlet and the tube that goes between the compressor outlet and the intercooler inlet. Does the Samco replacement for this latter part not include a fitting for it?
BOV ON AWIC ?
Posted: Tue Oct 21, 2003 11:51 pm
by Legacytuner
No I bought a 2" 45 degree elbow from the turbo to the i/c inlet and a 3"
coupler from i/c outlet to manifold. Is there a direct fit hose that has a place to put the bov
Re: BOV ON AWIC ?
Posted: Wed Oct 22, 2003 4:34 pm
by imprezausa
Legacytuner wrote:No I bought a 2" 45 degree elbow from the turbo to the i/c inlet and a 3"
coupler from i/c outlet to manifold. Is there a direct fit hose that has a place to put the bov
I just got the same I/C water-air and I'll try to add to my Legacy, so please post all the information you may have with pictures if possible. The best place for BOV is between I/C and TB. But there is not place to install. I’ll try to customize this one.
Posted: Wed Oct 22, 2003 10:45 pm
by rsstiboy
I have pics of mine with the samco hose on it PM me and I'll send photos.
Posted: Sat Oct 25, 2003 9:22 pm
by teaguespeed
how well does that 45 degree elbow work?
BOV ON AWIC ?
Posted: Sun Oct 26, 2003 3:01 am
by Legacytuner
the 45 seems to be the right angle and length im positive that it will work
gmhk
Posted: Sun Oct 26, 2003 5:52 am
by shizzl
what is awic?who you get it from?samco hoses?
im from NZ and can ask someone why theres no bov port...
do you have picks?
Posted: Sun Oct 26, 2003 6:36 am
by teaguespeed
awic= air to water intercooler, they came on liberty and legacy RS's in europe, japan, australia, and NZ.