legacycentral bbs

Posted: **Thu Apr 01, 2004 4:46 pm**

All pulled from a 1991 Legacy Sport Sedan (Turbo) with 106k miles

- Coolant Reservoir tank (The black plastic tank on the right side of the manifold) including radiator cap & mounting bolts, excellent condition! $50

- Coil Pack including mounting bolts. $25

- Aluminum Intake Manifold, including attached lines. Has Drivers side fuel-rails and injectors installed, passenger side fuel-rails and injectors are missing, Includes attached air injection purge solenoid and new PCV. $50

- Complete set of heads, fully assembled as they cam off the car, includes cams, valves rocker arms & valve covers. $125

- 70mm Throttle Body $25

- Intake manifold wiring harness $10

- Crank & cam sensors $10

- Power Steering bracket including belt tensioner $10

- A/C Compressor Bracket $10

Plus I’m sure there’s more…misc. brackets, coolant tubing, etc.

All prices include insured shipping to the continental U.S via FedEx Ground.

Also I need a few items, willing to make trades:
Legacy Turbo Oil Pan
Legacy Turbo Oil Pickup Tube

Posted: **Thu Apr 01, 2004 8:37 pm**

Would you sell the drivers fuel rail by iteself, no injectors?

Posted: **Thu Apr 01, 2004 9:24 pm**

ciper wrote:Would you sell the drivers fuel rail by iteself, no injectors?

Sure. What exactly do you need. Just the fuel rail (the part that has flanges on either end and is connected to the injectors)? Right.

Posted: **Thu Apr 01, 2004 9:30 pm**

If that's a Diamond coilpack, consider it sold. Seriously. I want it.
I'll PM you

Posted: **Thu Apr 01, 2004 10:51 pm**

You have a PM back!

Posted: **Fri Apr 02, 2004 2:06 am**

Doesnt look like a diamond pack to me.

The rail has the pressure regulator right?

Posted: **Fri Apr 02, 2004 2:16 am**

i thought the fpr was on the pass side?

Posted: **Fri Apr 02, 2004 2:57 am**

oil cooler?? Are these prices shipped?

Mark,

Posted: **Fri Apr 02, 2004 5:39 am**

Here's the coil pack:

Here's the Drivers side Fuel Rail:

LegacyT Prices include shipping, sorry but I need the oil cooler!

Posted: **Sun Apr 04, 2004 6:16 pm**

Will that manifold fit If I were to swap in DOHC heads?

Mark,

Posted: **Sun Apr 04, 2004 6:29 pm**

http://bbs.legacycentral.org/viewtopic.php?t=14464

Posted: **Sun Apr 04, 2004 9:36 pm**

elkaboom wrote:If that's a Diamond coilpack, consider it sold. Seriously. I want it.
I'll PM you

Not to jump on someone else's FS thread, but I have one that is on the engine coming out of my car this afternoon. PM me if you are interested.

Opie,
You didn't get any of the sensors from the turbo did you? I think my EJ20G might be missing one of the solenoids. I need to take a closer look, but just checking...

Posted: **Sun Apr 04, 2004 10:40 pm**

Matt Monson wrote:
elkaboom wrote:If that's a Diamond coilpack, consider it sold. Seriously. I want it.
I'll PM you
Not to jump on someone else's FS thread, but I have one that is on the engine coming out of my car this afternoon. PM me if you are interested.

Opie,
You didn't get any of the sensors from the turbo did you? I think my EJ20G might be missing one of the solenoids. I need to take a closer look, but just checking...

No problem, mine doesn't appear to be a diamond pack anyway!

I do have the crank & cam sensors of the motor...

Posted: **Wed Jan 25, 2012 12:21 am**

im in need of that crank. how does it look?

Posted: **Wed Jan 25, 2012 1:38 am**

Joshsmiley55 wrote:im in need of that crank. how does it look?

Ummm...this thread is 8 years old...these parts were all gone a long, long time ago

legacycentral bbs

EJ22T Engine Parts For Sale

EJ22T Engine Parts For Sale

Re: EJ22T Engine Parts For Sale

Re: EJ22T Engine Parts For Sale