Page 1 of 1
ELECTRICAL EXPERTS PLEASE READ!!!!
Posted: Wed Sep 01, 2004 12:03 am
by legacy13
I have a 1992 Legacy GT. I recently installed a turbo timer, made by Apexi and i had to hardwire the ignition part of it. After installing the timer, my turn signals do not work. My hazards don't work either. I just finished checking, and rechecking the connections, thinking that maybe i forgot to reconnect a harness. At any rate, the turn signals do not work, they get power, but they do not work. Please, any advice would be overwhelmingly appreciated.
Posted: Wed Sep 01, 2004 12:25 am
by vrg3
92 Legacy GT? Are you talking about a non-North American model?
Is it possible that during the installation process you might have damaged or disconnected the turn/hazard control box? On left-hand-drive models it's behind the dash between the center console and the glove box.
Posted: Wed Sep 01, 2004 3:20 am
by THAWA
Maybe he means touring wagon or sport sedan, a lot of people call them gt's
Posted: Wed Sep 01, 2004 6:02 am
by BAC5.2
If you do not connect the hazard switch, the turn signals do not work either.
Found this out the hard way
Posted: Wed Sep 01, 2004 7:37 am
by legacy13
It is the sport sedan, i just call it a GT for short. I think it is the hazard switch, because i spent 4 hours today checking and rechecking every single connection but i forgot to check the hazard switch. I'll try it tomorrow morning and let you guys know. Thank you so much for your help.