Page 1 of 1
MRT Master cylinder bracket.
Posted: Wed Sep 22, 2004 4:32 pm
by rally370
I forgot to tell you that fitting the MRT bracket and braided lines made a big different to the brake pedal feel.Get someone to push the brake pedal while you look at the master cylinder and you be amazed how much it moves.
I fitted the bracket in about 30 mins but did have to drill the rear holes bigger to fit it.
Cheers
Chris
Posted: Thu Sep 23, 2004 2:45 am
by Legacy777
yeah....it's pretty crazy to notice how much it does move. Even with the brace on there it still moves a little.
wow 30 min.....took me much longer. None of the damn bolts would line up/start on the firewall.
Posted: Thu Sep 23, 2004 3:05 am
by BAC5.2
Anyone got pics of the brace?
Posted: Thu Sep 23, 2004 2:23 pm
by Legacy777
Posted: Thu Sep 23, 2004 4:02 pm
by rally370
Josh
It only took about 30 mins because I put the bracket there first and checked the holes.I noticed the two rears were not in line so I drilled the holes bigger.Job done
I also made my own clutch center tool with a piece of wood dowel through a 17mm socket,worked a treat.
Thanks for the photo links.
Cheers
Chris
Posted: Thu Sep 23, 2004 4:02 pm
by BAC5.2
Josh, for some reason your website takes FOREVER to load pics on my computer. And it's only your site.
I STILL haven't seen the shift linkage install pics
Posted: Thu Sep 23, 2004 6:14 pm
by Legacy777
hmmm
They are on my personal server, so that may be why it takes longer. What internet connection speed do you have?
Posted: Thu Sep 23, 2004 6:15 pm
by BAC5.2
College Ethernet...
Posted: Fri Sep 24, 2004 4:07 am
by totech
BAC5.2 wrote:Josh, for some reason your website takes FOREVER to load pics on my computer. And it's only your site.
I STILL haven't seen the shift linkage install pics
I cannot see them because of the port number - same as my proxy server
Posted: Fri Sep 24, 2004 5:50 am
by BAC5.2
Which means...
Posted: Fri Sep 24, 2004 2:07 pm
by Legacy777
Try these. It'll give you a pop up about the certificate not matching, but you should at least be able to view them. You can do this for any of the links/pics I post. Change it to https and get rid of the 8080 port.
https://www.main.experiencetherave.com/ ... acket1.jpg
https://www.main.experiencetherave.com/ ... acket2.jpg
https://www.main.experiencetherave.com/ ... acket3.jpg
there's some various pics scattered in this page
https://www.main.experiencetherave.com/ ... egswap/09/
there's a pic from beneath on this page
https://www.main.experiencetherave.com/ ... egswap/10/
