Page 1 of 1
What Size or Model?
Posted: Wed Feb 16, 2005 10:52 pm
by Jman
Hey I'm putting on a new muffler on my Turbo mt, most likely a magnaflow cause there relitivly cheap and sound nice, anyhow what sizes/models are you useing?
Posted: Wed Feb 16, 2005 10:56 pm
by tris91ricer
muffler inlet depends on the size of your exhaust, which should be 2.25".
I think most would recommend the 40 series when it comes to supercat/magnaflow.
Posted: Thu Feb 17, 2005 5:19 am
by Jman
Acctually mabee some exhaust work has been done on my car i measuerd with some calipers today and it cam to 2.5" exhaustbut anyhow i still need a new muffler cause mines almost rusted out!
Posted: Thu Feb 17, 2005 5:52 am
by legacy92ej22t
Is that measurement ID or OD though? If you measured the outside (OD/ or outside diameter) of the exhaust pipe then it will be bigger then the inside (ID/ inside diameter) which is what we're talking about. A 2.25" exhaust (ID)would probably have an OD of around 2.5".
Posted: Thu Feb 17, 2005 5:59 am
by BAC5.2
Yea, stock = 2.25" ID.