Page 1 of 1
Will these front enlinks of a wrx work for my leggy?
Posted: Fri Mar 11, 2005 11:28 pm
by snowjob
Posted: Sat Mar 12, 2005 4:11 am
by 206er
stock endlinks have 2 different sizes of bolts, and the ones on those look the same size. maybe ask the seller for all the measurements on em to make sure they are the same length and the bolts fit.
Posted: Mon Mar 14, 2005 3:29 pm
by professor
one end of the WRX links is larger, both the bolts and bushings. You can use them if you have a 10mm drill and get a 10mm bolt to replace the 8mm bolt that is on one end of the stock link, or if you get the bolts with the links.
This is easy and then you have a limitless supply of good links taken off WRX's, and also then all of your bushings on the endlinks front and rear will be the same size, and the poly bushings from Energy will fit in all of them.