Timing belt Video and Clutch install video
Posted: Tue Jun 28, 2005 1:35 am
I am adding a clutch install video and IF I GET 15 people to SAY they want it (just want it, not buy it), I will tear off and reinstall a timing belt. To those who have already responded, you will get this as well.
These two chapters are in addition the basic engine rebuild DVD I have already offered. The DVD is available now (since they are burning a whopping 2 a day) but the files via the internet will be available as soon as I a- get the files converted, b-get them uploaded on a setup faster than my 56k, and c- Get them transferred over to Josh at legacycentral.org
One chapter is currently uploaded for viewing. It is the piston pulling video previously posted. It is for a 2.2 motor, but it is relevant for all Subaru motors.
http://www.vincentfurniture.com/photos/ ... onpull.wmv
I am not a vendor. I am not doing this for money but I do need compensation if you want one. All these chapters are/will be free for download when they are uploaded. I don't care if you copy or host.
I have created a DVD of the basics of engine rebuild, which includes 7 sections.
1- tools need to pull pistons (I assume you have actually pulled the engine and removed heads.
2- shows where the access plates to wrist pins are
3- shows access holes to the wrist pins open
4- shows piston removal of two pistons
5- shows how to install rings
6- shows how to compress rings
7- shows how to install pistons
8- how to install a clutch
9- how to install a timing belt (if I get enough call for it)
But if you want the DVD, I want $7.50 to cover my time and material. Feel free to copy and distribute. Email or private message me.
Mail to:
Vincent Furniture
5423 SE Woodstock
Portland Oregon, 97206
I will mail as soon as it shows.
Doug, the proud owner of Reddevil, the only supercharged Legacy in the world!
These two chapters are in addition the basic engine rebuild DVD I have already offered. The DVD is available now (since they are burning a whopping 2 a day) but the files via the internet will be available as soon as I a- get the files converted, b-get them uploaded on a setup faster than my 56k, and c- Get them transferred over to Josh at legacycentral.org
One chapter is currently uploaded for viewing. It is the piston pulling video previously posted. It is for a 2.2 motor, but it is relevant for all Subaru motors.
http://www.vincentfurniture.com/photos/ ... onpull.wmv
I am not a vendor. I am not doing this for money but I do need compensation if you want one. All these chapters are/will be free for download when they are uploaded. I don't care if you copy or host.
I have created a DVD of the basics of engine rebuild, which includes 7 sections.
1- tools need to pull pistons (I assume you have actually pulled the engine and removed heads.
2- shows where the access plates to wrist pins are
3- shows access holes to the wrist pins open
4- shows piston removal of two pistons
5- shows how to install rings
6- shows how to compress rings
7- shows how to install pistons
8- how to install a clutch
9- how to install a timing belt (if I get enough call for it)
But if you want the DVD, I want $7.50 to cover my time and material. Feel free to copy and distribute. Email or private message me.
Mail to:
Vincent Furniture
5423 SE Woodstock
Portland Oregon, 97206
I will mail as soon as it shows.
Doug, the proud owner of Reddevil, the only supercharged Legacy in the world!
.