Page 1 of 4

EJ 22t heads

Posted: Mon Sep 26, 2005 9:44 pm
by bmxpunk
So I blew my head gasket. I disassembled the heads today and saw "22B" stamped inside the head under the rocker cover.

What gives?


Any body ported these heads and have pictures.

Posted: Mon Sep 26, 2005 9:53 pm
by tris91ricer
Ask NICO I WRX U. He's the one, IIRC, that has pnp heads.. Although, I highly doubt he's got pics. Canucks don't like to prove things. :P

Posted: Mon Sep 26, 2005 10:30 pm
by bmxpunk
I just sent off my cams to delta too :P

As long as nothing else is wrong, this will be awsome.

Posted: Mon Sep 26, 2005 10:37 pm
by tris91ricer
Yup, pnp, cams, and turbo.. You'll be sittin' purrttty. :D

Posted: Mon Sep 26, 2005 10:50 pm
by bmxpunk
Being that my car is 500lbs lighter than the sti and having almost everything done to it, You think I can come close to Sti territory? Easily past wrx quickness wouldn't you thing?

Posted: Mon Sep 26, 2005 10:51 pm
by tris91ricer
bmxpunk wrote:Being that my car is 500lbs lighter than the sti and having almost everything done to it, You think I can come close to Sti territory? Easily past wrx quickness wouldn't you thing?
Only one way to find out. :wink:

Posted: Tue Sep 27, 2005 12:38 am
by NICO
tris91ricer i have factory heads on my ej22t, i do have port an polished heads. how am i going to take a pic if i rebuilt my motor about 3 years ago, when i blow a piston and have to rebuild the motor agian i will take a pic just for you.

port an polish is worth it all the way on our factory heads. it free's up so much power and smooth reving right up to 260kms.

the factory heads got 22b stamed on them, where i have 6 sets in my garage i am going to check them out right now.

Posted: Tue Sep 27, 2005 1:06 am
by bmxpunk
I was just wondering about pictures, thought someone might be weird like me and chronicle everything I do to my car for reference later.


THe 22b is stamped in the head underneath the cams and rocker covers. I will take a picture. (be week before I can get it on here)

Posted: Tue Sep 27, 2005 3:31 am
by BAC5.2
Must be a coincidence. The real 22B heads are DOHC and are no joke. Best flowing Subaru heads, second to the V7 Spec-C heads. If you had those, you'd know it.

Posted: Tue Sep 27, 2005 3:37 am
by dzx
I think the 22B is a hexadecimal number, i saw a post explaining what it referred to but i dont remember where. Mine were stamped that also.

Posted: Tue Sep 27, 2005 6:39 am
by bmxpunk
Yeah I knew they werent the 22b heads. I just wondered why they said it. I really would love to put some JDM dohc heads on the thing. Just looking at pictures of Matt's RS-RA heads, you can see how incredibly small these valves are.

Posted: Tue Sep 27, 2005 12:33 pm
by legacy92ej22t
I don't know what the 22b designation is for but when I was looking for EJ22Ts from yards, they always gave an engine code that ended in 22b. Like this: #300-91122B

Posted: Tue Sep 27, 2005 7:01 pm
by AWD_addict
dzx wrote:I think the 22B is a hexadecimal number, i saw a post explaining what it referred to but i dont remember where. Mine were stamped that also.
22B is hexadecimal for 555, the tobacco company that sponsored the Subaru WRC team for years. When they made the STi 22B model, they gave it that designation as a sort of salute to the company.

As far as the stamping in heads, I have no idea.

Posted: Tue Sep 27, 2005 7:23 pm
by tris91ricer
AWD_addict wrote:
dzx wrote:I think the 22B is a hexadecimal number, i saw a post explaining what it referred to but i dont remember where. Mine were stamped that also.
22B is hexadecimal for 555, the tobacco company that sponsored the Subaru WRC team for years. When they made the STi 22B model, they gave it that designation as a sort of salute to the company.

As far as the stamping in heads, I have no idea.
WTFizzle? Tell me you're kidding.

Posted: Tue Sep 27, 2005 7:59 pm
by greg donovan
tris91ricer wrote:
AWD_addict wrote:
dzx wrote:I think the 22B is a hexadecimal number, i saw a post explaining what it referred to but i dont remember where. Mine were stamped that also.
22B is hexadecimal for 555, the tobacco company that sponsored the Subaru WRC team for years. When they made the STi 22B model, they gave it that designation as a sort of salute to the company.

As far as the stamping in heads, I have no idea.
WTFizzle? Tell me you're kidding.
nope. hes not kidding.

type 555 into the calculator built into windows (switch it to scientific view fiorst)and then convert it to hex and you will get 22b.

Posted: Tue Sep 27, 2005 8:05 pm
by tris91ricer
:roll:

I should have been clearer.

I meant about the tobacco stuff.

I know 555 = 22b in hex.

Posted: Tue Sep 27, 2005 8:24 pm
by skid542
He's not joking about the 555. I think the last picture up in the top left corner was of the 555 Legacy. I didn't know that's why they named the 22b but Subaru and 555 used to be good pals from what I understand.

Posted: Tue Sep 27, 2005 8:50 pm
by legacy92ej22t
Why would the 555 tobacco sponsor thing surprise or anger you?

I know that there is a lot of hate for the tobacco industry as of late but think of all the sponsorship money they have poured into motor sports. Without 555 Subaru probably wouldn't have the long rally heritage that it does and we wouldn't be blessed with such wonderful vehicles.

I say salute 555.

Posted: Tue Sep 27, 2005 9:02 pm
by tris91ricer
Uhmm.. Maybe its an east coast thing? I smoke marb lights, but uh.. this triple-5 deal is new to me.. what is it?

Posted: Tue Sep 27, 2005 11:53 pm
by NICO
that is crazy 555 22b thing, so our cars must be the first made 22b motors, then they made a upgrade with the dohc to make more power.

so ej22t motors are 22b but we didnt get badged that becuse imprezas didnt come with the ej22t motor in north america.

so does it make my 95 impreza L sedan a impreza 22b becuse i put everything from a turbo legacy ej22t in it? one thing i might add, i own a basic model of fthe imprezas and it reads 220kms on my speedo from factory thats what my legacy read to, but all the 2.5motor cars all read only 180kms.

1995 subaru impreza 22b sedan.

Posted: Tue Sep 27, 2005 11:58 pm
by dzx
If that's true, they also moved the thrust bearing and some other upgrades.

Posted: Wed Sep 28, 2005 12:14 am
by AWD_addict
tris91ricer wrote:Uhmm.. Maybe its an east coast thing? I smoke marb lights, but uh.. this triple-5 deal is new to me.. what is it?
I think 555 never sold anything in the US, just overseas. If you're trying to get a pack, I'd try googling it. Seems online stores sell them.

And also, how have you never heard of the 555 connection to Subaru before? Ricers are usually concerned with car graphics. :P

Posted: Wed Sep 28, 2005 1:40 am
by bmxpunk
NICO I WRX U wrote:that is crazy 555 22b thing, so our cars must be the first made 22b motors, then they made a upgrade with the dohc to make more power.

so ej22t motors are 22b but we didnt get badged that becuse imprezas didnt come with the ej22t motor in north america.

so does it make my 95 impreza L sedan a impreza 22b becuse i put everything from a turbo legacy ej22t in it? one thing i might add, i own a basic model of fthe imprezas and it reads 220kms on my speedo from factory thats what my legacy read to, but all the 2.5motor cars all read only 180kms.

1995 subaru impreza 22b sedan.

Hey are you mocking me?? :lol: Do you really think they were planning the 22B in 1995 (or 1993 for that matter)? Hey NIco if its not a secret or anything, or if you even know, were your exhasut ports enlarged? I keep hearing about this "step thing," and that your not supposed to enlarge the exhaust port. I wonder if its really supposed to be " the exhaust port shouldn't be any larger than XX" "

Posted: Wed Sep 28, 2005 4:27 am
by bmxpunk
Hey, is it better to have the intake side "rifled" or perfectly smooth?

Posted: Wed Sep 28, 2005 5:38 am
by dzx
its better to have the intake part a little rough