Page 1 of 1
Single DIN and 1.5 DIN pockets exist!
Posted: Tue Dec 17, 2002 3:46 am
by ciper
Eastbaysubaru and I went to a junk yard near us and the 90 champagne colored FWD legacy sedan had a 1.5 din pocket! Other weird items too like rear seats that DIDNT fold down.
So this just confirms that 1.5 din pockets to fit your aftermarket stereos exist. Problem,,, NO FU(KING part numbers! We both looked all over the thing.
Posted: Tue Dec 17, 2002 5:43 am
by eastbaysubaru
Yeah, I forgot to bring it up. I NEED this 1.5 DIN pocket. It even had the flip down lid as opposed to the ones that are just open pockets. If anyone has the part number for this piece I would really appreciate it if you'd post it. Right now I've just got a stupid little plastic piece in place of the extra half DIN that's leftover. Anyone?
-Brian
Posted: Tue Dec 17, 2002 6:30 am
by entirelyturbo
Excuse me for not being up-to-the-minute on your terminology, but are you talking about the compartment below the stereo? Because I'm looking for a bigger one to fill in the gap I have from my smaller CD head unit...
Posted: Tue Dec 17, 2002 3:21 pm
by Legacy777
You guys didn't know there was a 1.5 DIN pocket??
Ask and ye shall receive.....
Radio Pocket
w/o L model.......66130AA050............$45.75
w/L model..........66130AA080............$18.05
Radio Pocket Door
w/o L model........66188AA000...........$13.42
w/L model...........66188AA010...........$11.65
All you have to do is figure out which one is the fatter one
Posted: Tue Dec 17, 2002 7:38 pm
by ciper
I would guess the L model is the one!!
The L is the lower model so it has the crappy (relative) single din radio. I wonder why the parts had no part numbers?
subyluvr2212: You got it, I personally dont need it since I have the double din wrx radio.
Posted: Tue Dec 17, 2002 7:50 pm
by entirelyturbo
But you could get the L with the 80W stereo which was 1.5 DIN. That's what mine is!
Posted: Wed Dec 18, 2002 8:36 am
by eastbaysubaru
So the pocket and door are two seperate part numbers? That's kinda wierd. Does anyone actually have the unit in their car? I only ask because I want to make sure I order the correct one. It seems by the part numbers that there are two different pockets and only one door. That is also strange as I would assume a 1.5 DIN door wouldn't fit on a single DIN pocket
Therefore I'm wondering what the difference is between the two pockets. Anyone?
-Brian
Posted: Wed Dec 18, 2002 3:45 pm
by Legacy777
Again.....I screwed up.......I'll edit my post......damn cap't morning!!!!
Posted: Wed Dec 18, 2002 9:49 pm
by ciper
Legacy777: where did you get the part numbers?
Posted: Thu Dec 19, 2002 4:14 pm
by Legacy777
Legacy parts datasheet pdf......it's on my site and dave's.....and has been there for a while
Posted: Thu May 28, 2009 10:55 pm
by yazmo
hey can i know which one is the bigger 1.5 din pocket door which look better highest price?
Posted: Fri May 29, 2009 2:19 am
by Legacy777
Please see my reply to your other post, and contact beater_legacy to resolve your issues if you not have already done so.
I do not want to see a flame war. Please work out your issues directly.
Posted: Fri May 29, 2009 11:58 pm
by yazmo
its hard to tell which is the fatter one bcuz i cant see any pics of these
which one is the correct one 1.5 din pocket?
in those part number you show why one is much more expensive any reason?
Posted: Sat May 30, 2009 7:04 pm
by 94.GT.Wagon
The one you want is #66130AA050. It's $36.77 at subarugenuineparts.com and comes with the door. I have one in my car I ordered from them. I suspect that the reason it costs more than the single DIN pocket is because the single DIN is much more common so they made a ton of them (higher production=lower cost), that's just a guess though.
Posted: Sat May 30, 2009 7:05 pm
by yazmo
hx you bro so i can finaly order this and install my radio correctly thx again