Page 1 of 1
how to put in my fogs from ebay
Posted: Thu Sep 29, 2005 12:26 am
by voorhees
so i got some sweet prjector fogs from HK for a legacy wagon 97 i think. i cut my 99 GT bumper holes a tad bigger as to squeeze them in(perfect fit) But these brackets do not attach to bumper reinforcement #57732AC020 or 57732AC021(same item) the brackets from the factory fogs wont fit the new fogs...Anyone got any ideas? Please help
Posted: Thu Sep 29, 2005 12:28 am
by voorhees
i have a BD fogs came from a BG(outback)?
Posted: Thu Sep 29, 2005 1:07 am
by BAC5.2
Make custom brackets?
It's just a peice of stamped steel right? You can make extensions and bolt to that, or you can go to Home Depot or something, and find yourself a nice sheet of stainless.
Figure out what you need to do, and cut it up with some snips or a cut-off-tool. Make sure it's flat, and use a peice of wood and a hammer to make the appropriate bends. Drill holes where the screws would go, and bolt it to the bumper beam.
That'd be the absolute best way to go.
Don't be afraid of the hammer, young grasshopper.