legacycentral bbs

Posted: **Mon Oct 17, 2005 3:20 am**

Parts from 1991 SS, 1992 SS and 1990 N/A wagon. Located in Northeastern PA, most is shipable.
5 speed n/a tranny, 4.11, with all the stuff you need to make the swap from auto to manual; clutch pedal, slave cylinder, shifter and boot. Offer.
MAF’s, both Hitachi and JECS.
Turbo ECU.
Tan (cream?) leather interior (from 1994 GT wagon), includes door cards, console lid, handbrake lever and 4eat gear shift lever.
Headlights, taillights, cornerlights, turn signals. (wagon and sedan, 90-94)
Diamond coil packs, $25.
Stock coil packs, $10
Grills: 1990 honeycomb style or 1991 bar style, $20
Radios with AUX (iPod) input jack.
Turbo and n/a front and rear brakes.
Sunroof glass, motors, controllers and switches.
Windshield and rear glass. Sedan and wagon.
Window triangles “sails”, the plastic piece by the side mirrors, $5 ea.
14” steel wheels, $10 each
14" alloy "teardrop" wheels, $20 each, no center caps.
Turbo hood with scoop, Winestone, (will not ship)
Control arms, xmembers, steering racks, PS pumps, alts, A/C parts.
Interior plastic pieces, cargo covers,
Lots and lots of other stuff……..send PM with your needs……
Do NOT have: Power antennas, “turbo” badges, turbo 5 speed trannys.

Posted: **Mon Oct 17, 2005 4:07 am**

I'll take those 7 1990 grille clips. I'm guessing same price as last time?

Posted: **Mon Oct 17, 2005 1:26 pm**

Any axles?

Posted: **Mon Oct 17, 2005 2:04 pm**

Got front and rear axles.

Posted: **Mon Oct 17, 2005 4:45 pm**

Due to all of the rain, I have not install the caliper you sent me yet but I will get to it.

Did you happen to find the horn buttons that I PM'ed you about a while back? How much for:

1. A/C compressor (calsonic)
2. Stock radio w/AUX-In

Thanks,
-Jeremy

Posted: **Mon Oct 17, 2005 9:28 pm**

Blackbart wrote:Got front and rear axles.

How much for a set of fronts? I might need em relatively soon.

PS, got any FWD ones? those should fit a turbo 5mt right?

Posted: **Mon Oct 17, 2005 11:05 pm**

91White-T wrote:
Blackbart wrote:Got front and rear axles.
How much for a set of fronts? I might need em relatively soon.

PS, got any FWD ones? those should fit a turbo 5mt right?

The ones I have are AWD, don't know if they are the same as the FWD but I always THOUGHT they were the same. Anybody know for sure?

Posted: **Mon Oct 17, 2005 11:11 pm**

The FWD ones are thicker, but they're physically interchangeable.

Posted: **Mon Oct 17, 2005 11:41 pm**

I have FWD ones on my turbo.

Posted: **Tue Oct 18, 2005 10:48 pm**

91White-T wrote:
Blackbart wrote:Got front and rear axles.
How much for a set of fronts? I might need em relatively soon.

PS, got any FWD ones? those should fit a turbo 5mt right?

All I have for the fronts right now is the AWD's. Will that do or are you wanting the FWD?

Posted: **Tue Oct 18, 2005 11:28 pm**

Jeremy, if Frank doesn't have the Calsonic I've got one you can have for cheap.

*I'm not trying to undercut you buddy, just making sure our board members have what they need.*

Posted: **Wed Oct 19, 2005 12:24 am**

I would prefer the FWDs, especially now that the car is not stock, I would rather not send twice as much power through AWD axles.

Posted: **Wed Oct 19, 2005 12:34 am**

91White-T wrote:I would prefer the FWDs, especially now that the car is not stock, I would rather not send twice as much power through AWD axles.

There is a FWD in a yard that I am planning to go to this weekend, I'll try to grab them if they look good.

Posted: **Wed Oct 19, 2005 12:35 am**

skid542 wrote:Jeremy, if Frank doesn't have the Calsonic I've got one you can have for cheap.
*I'm not trying to undercut you buddy, just making sure our board members have what they need.*

No problem, we already worked out a deal, just waiting for payment........

Posted: **Wed Oct 19, 2005 2:22 am**

Yep, thanks Lee.

Frank, I'm PM'ing you now.

Posted: **Wed Oct 19, 2005 4:02 am**

It's very possible I will buy a 92-94 right front turn signal from you. But I need to make a JY run tomorrow so I need to see how that turns out...

Posted: **Wed Oct 19, 2005 12:04 pm**

Curious if you have A 90 - 91 passenger side fender in good condition.

Posted: **Wed Oct 19, 2005 12:54 pm**

QuickDrive wrote:Curious if you have A 90 - 91 passenger side fender in good condition.

Nope, no good front 90-91 fenders, I need a couple myself, black.

Posted: **Wed Oct 19, 2005 4:46 pm**

Alright Frank, I'll take a right side 92-94 front turn signal if you got one.

Also, if you have a 92-94 right side fender, could you check a shipping price to 32804?

Thanks!

Posted: **Wed Oct 19, 2005 7:08 pm**

subyluvr2212 wrote:Alright Frank, I'll take a right side 92-94 front turn signal if you got one.

Also, if you have a 92-94 right side fender, could you check a shipping price to 32804?

Thanks!

Pm'd ya about the corner light but got no good fenders...........

Posted: **Fri Oct 21, 2005 8:28 am**

any rear strut mounts? Do the radios with aux inputs have subwoofer outs?

Posted: **Sat Oct 22, 2005 2:42 am**

I have strut mounts but there is no subwoffer port on the radio.

Posted: **Sat Oct 29, 2005 4:27 pm**

Do you have gray velour visors with wire hookup for vanity lights in good condition? Looking mainly for passenger side but will consider driver's and passenger's for a matching set. Complete price shipped to 85268?

Posted: **Sat Oct 29, 2005 10:03 pm**

93Leg-c wrote:Do you have gray velour visors with wire hookup for vanity lights in good condition? Looking mainly for passenger side but will consider driver's and passenger's for a matching set. Complete price shipped to 85268?

Sorry, no gray velour visors.

Posted: **Sun Oct 30, 2005 5:37 am**

OK, thanks!

legacycentral bbs

FS: Turbo and N/A Parts (PA)

FS: Turbo and N/A Parts (PA)