Page 1 of 1
Yet another interesting ABS question
Posted: Wed Nov 23, 2005 6:26 am
by TurboSubie
Ok guys here's the scoop. I had 2 ss's at the time...my 91(parts car) and my 94.. My master cylinder went bad on my 94 so I took it off of the 91. I get everything back together and my abs light turns on..what caused this? is there some type of fluid sensor that triggers this or is it because I had to bleed the brakes? they are bled pretty good and the light still remains
Posted: Wed Nov 23, 2005 6:34 am
by vrg3
It may be unrelated. Check your battery and alternator; low system voltage can trigger the ABS light. Didja maybe leave the door open with the dome light on for a long time?
Posted: Wed Nov 23, 2005 11:57 pm
by TurboSubie
This has kind of been an ongoing problem. I have since then changed the alternator and the battery...hmmm. possibly try pulling the fuses?
Posted: Tue Nov 29, 2005 8:08 pm
by vrg3
Read the ABS computer trouble code(s). I think I've posted about how to do it; you basically pull back a flap of carpet under the passenger seat and watch the LED flash.