Page 1 of 1
s-afc problems
Posted: Mon Dec 26, 2005 1:21 am
by irishsetter
I Just installed a apexi s-afc and can not get the car to run on it. I am 90% sure it is wired right but only 20% sure how to setup the damn thing. I printed the instruction manual off line for it but after my efforts it still wont work. What things do I have to setup in the program just to get it to run enough to get it to ny friends tuner shop?
Posted: Mon Dec 26, 2005 2:53 am
by irishsetter
Oh yeah I have a 91 ej22t
Posted: Tue Dec 27, 2005 5:20 am
by irishsetter
Ok I got it running but now it is running rich and hitting fuel cut.
Posted: Tue Dec 27, 2005 6:01 am
by magicmike
I dont think too many people on here know much about the s-afc. this may be why there are not so many replies. I wish I could help but cant.
Posted: Tue Dec 27, 2005 6:20 am
by dzx
What do you want to know about it, I have one in my car.
Posted: Tue Dec 27, 2005 1:23 pm
by irishsetter
Right now my car will run but it runs rich and hits fuel cut out. I think I am going to have it raod tuned by a shop.
Posted: Thu Dec 29, 2005 2:00 pm
by irishsetter
Ok I have my throttle line wired in to my TPS is this right? I am showing 100% throtle on the afc at idle and it goes down when I give it gas. This seems backwards. I am still hitting fuel cut or just some type of hesitation. What does everyone have there DEC. AIR set to?
Posted: Thu Dec 29, 2005 5:46 pm
by Legacy777
You've got the throttle line setup, but since our TPS signal is a falling signal, it's going to be backwards. I ran into the same issue with perfect power.
Posted: Thu Dec 29, 2005 9:55 pm
by irishsetter
what did you do about it. were you able to tune in the perfect power any ways.
Posted: Fri Dec 30, 2005 3:35 am
by Legacy777
I just have to setup my maps backwards. It's not really a big deal in the pp. But I'm not sure how the S-AFC is.
Posted: Fri Dec 30, 2005 6:35 am
by dzx
Dec Air setting is for hot wire mafs to keep them from stalling when the bov vents. I left it turned off. There are some threads on nasioc for setting the Dec Air.
Throttle type should have the arrow pointing down and to the right.
10in/10out
1in/1out