Page 1 of 1
Plastic screw/pushy-in things in fender liner
Posted: Wed Jan 04, 2006 11:11 pm
by Splinter
Whats the easiest way to remove them?
Ive got the car jacked up right now, and half the fender liner off, but I cant get two of these things out
Posted: Wed Jan 04, 2006 11:19 pm
by LaureltheQueen
pry them out with a screwdriver
Posted: Thu Jan 05, 2006 12:20 am
by Splinter
I just pulled on the liner til they popped out, seemed to work ok
Posted: Thu Jan 05, 2006 12:57 am
by magicmike
normally you can just unscrew the plastic screw and it pops out but often the screw is hard to get out so I use my snap on right angle pick to jab under and pry the screw out.
Posted: Thu Jan 05, 2006 2:47 am
by Manarius
Cut it off with a saw and replace it with a real bolt and nut.
Posted: Thu Jan 05, 2006 3:25 am
by Legacy777
Yeah mine busted. I need to buy some more plastic pushy things
Posted: Thu Jan 05, 2006 3:31 am
by Splinter
Legacy777 wrote:Yeah mine busted. I need to buy some more plastic pushy things
Is that the official term for them now?
Posted: Thu Jan 05, 2006 3:32 am
by Legacy777
If you want
Posted: Thu Jan 05, 2006 11:28 pm
by kidatari
Anyone have the part number for those things?
Posted: Fri Jan 06, 2006 4:22 am
by Legacy777
Just got to lowes or home depot....you should be able to find something similar that will work.