legacycentral bbs

Will 92-94 front spring perches fit 04+ WRX springs?

I THINK yes, but I didn't have a loose set to try them out with.

Any confirmation, or do I need WRX upper perches?

I had all that stuff out when I switched my struts and I didn't try. It tears me up inside. although next week I'm taking my knuckle off so it wouldn't be too much extra work to take off the strut too if no one has the answer and you want to wait.

I think they will work Phil. I used WRX tophats in my car in the front, and they fit, so I can figure they are interchangable...

all front top hats are interchangeable.

phil - ryan (pwise) told me that the 1st gen. legacys are compeletly interchangable with the WRX suspension parts... if you're unsure, check out http://www.uklegacy.com/ under Gentral Technical-Pinned- Legacy/Impreza Interchangability

92-94 front Legacy perches are different from 93-03 front Impreza perches.

I don't know about 04+ Imprezas.

belladonna wrote:phil - ryan (pwise) told me that the 1st gen. legacys are compeletly interchangable with the WRX suspension parts... if you're unsure, check out http://www.uklegacy.com/ under Gentral Technical-Pinned- Legacy/Impreza Interchangability

We're talking about bugeye and newer. All that thread mentions is the 1st gen impreza, and the one post relating to 04 STi stuff says it doesn't fit.

From going out side with a tape measurer right now they seem to be about the same. I can't really reach up in the tower very far, though.

Yea, I need to know about 04-05 WRX front springs.

Are the front perches different between 90-91 and 92-94?

Luckily I have both types at my disposal.

Phil

Can you use 04-05 springs on a bugeye or GC Impreza?

All first-generation Legacy front perches are the same.

No, unfortunately you cannot use 04+ WRX springs on an 02-03 or a GC Impreza.

Hm, okay, so there's a chance first-gen Legacy perches are right.

I have 2004 WRX Struts and springs, and the rex tophats fit the front fine, no issues at all. The rears don't work, as the orientation of the lower bolts won't work on the Legacy with the WRX fixed-position tophat.

yes, we know that. The question is whether the upper spring perches are interchangable in the front, not the tops. Like I said, all the front subaru top mounts are the same, but the springs and therefore the spring perches differ.

Also Nick what are you using in the rear?

Jamal - I'll be able to check for sure on Friday night. If you can check before then, I am EXTREMELY anxious to know!

I have a good feeling they may actually work!!!!

jamal wrote:
Also Nick what are you using in the rear?

As far as tophats?

I just reused the stock SS ones...they seem to work fine...and mine were in great condition...

On a completely unrelated note...2 WRX Rear tophats for sale...cheap

You check yet Jamal?

No my spindle hasn't shown up yet. It should be here tonight, though. I'll take everything apart when I get done with class tomorrow (at 1:30).

Or not. How in the hell do you break a knuckle?



Dirty cocksuckers. That's two packages they've fucked up for me, although at least this time they're admitting it.

Looks like I'm not going to San Diego this weekend.

woo hoo. my spindle showed up so apparantly it wasn't broken. There is a nice hole in the side of the box though. Still want me to pull apart my strut when I replace it tomorrow?

Yes please, if it's not too much trouble...

Results are in

Answer = no.

The 93 Legacy perches are bigger.




In other news my spindle replacement is going alright. Ball joint popped right out. The tie rod end is being a bitch though.

I did the suspension on my buddies DSM today, and while I was at it, checked. Definately bigger, and incompatable.