Page 1 of 1
Still WTB: Saab Ic piping
Posted: Sat Mar 11, 2006 5:15 am
by Imprezive
I am looking for some Saab intercooler piping (pre-fab'ed) to go from the turbo to the I/C inlet. I have a vf10 turbo so it need to be able to fit a 90 degree outlet
Dont mind the previous posts, I changed this thread around a lot
Posted: Sat Mar 11, 2006 8:29 pm
by napphappy
Yeah one for an EJ22t should work fine. Changing those on the "g" is a nightmare.
Posted: Sat Mar 11, 2006 8:46 pm
by LaureltheQueen
if it's the same one as a ej22t, which i'd imagine, it's an fv277 iirc fram part number. Most subarus use this pcv valve number
Posted: Sun Mar 12, 2006 4:50 am
by MrSarcastic13
I just had this changed in my car by a friend of mine. Was less than $10 if I remember correctly. Any autozone like shop should have it.
Posted: Sun Mar 12, 2006 5:12 am
by Splinter
Picked mine up for $8 from a local auto shop
Hanging off a peg on the shelf.
Posted: Sun Mar 12, 2006 6:49 pm
by Imprezive
Haha cool, I was hoping they would be interchangleable, And since I have mu turbo, intake piping pulled out it shouldn't be as hard to change.
Thanks for the help guys!
Posted: Tue Mar 14, 2006 5:22 am
by Imprezive
Alright, I picked it up today, it was only $3.99! I used Laurel's Fram part no. You better be right!
Posted: Tue Mar 14, 2006 1:56 pm
by BAC5.2
I have a SAAB intercooler and pipe. All you need is the hose to connect the turbo outlet to the pipe.
Posted: Tue Mar 14, 2006 5:19 pm
by Imprezive
Yeah all I need is the piping, but do you think it will work with a VF11? Is that pipe made for the inlet to be on the left or right of the intercooler, because the way I have my intercooler positioned is so the pipe goes under the intercooler and to the right side where the inlet is.
Posted: Tue Mar 21, 2006 4:23 am
by Imprezive
bump dangit! I need the IC piping quick if anyone has it! My weld is out of argon gas