Page 1 of 1
Parting out 2 Legacy Turbos
Posted: Tue Apr 18, 2006 4:46 pm
by LegacyPGT
Well since I hade a little encounter with my rally car and a tree at 100aw rally this year I'm parting everything out. The rally car is a 93 and the parts car is a 91. I am keeping the block, gearbox, rear diff, and crossmembers, other then that everything is up for grabs.
Multiple things
3 ECU's
2 TCU's
3 VF-11 Turbos
3 sets of heads
3 sets of rear calipers with rotors
3 sets of front calipers with rotors
12 15" turbo wheels
Auto transmission, shifted very well, out of the 91
Full interior out of both cars
headlights and tail lights from both cars
2 sunroofs
Make an offer on anything and everything.
Posted: Tue Apr 18, 2006 8:53 pm
by Project_Legacy
the front calipers are the 2 piston calipers correct? they should just be able to bolt onto an N/A car right?
the turbo rear calipers are bigger than the N/A rear calipers right?
what is a ballpark figure you would want for a set of front and rear calipers? i dont wanna lowball... and i dont know how much they go for... so im gonna say 50 dollars plus shipping to 98404??
let me know! thanks
turbo legacy parts
Posted: Tue Apr 18, 2006 11:40 pm
by FNSTI
hey wondering if you have front springs from a turbo and if youll do jsut rear turbo calipers and hangers- no rotors.. shipping would be to 80022. thanks..
Posted: Wed Apr 19, 2006 1:50 am
by rallylegacy57
How much for 4 wheels?
Posted: Wed Apr 19, 2006 2:09 am
by Manarius
Project_Legacy wrote:the front calipers are the 2 piston calipers correct? they should just be able to bolt onto an N/A car right?
the turbo rear calipers are bigger than the N/A rear calipers right?
what is a ballpark figure you would want for a set of front and rear calipers? i dont wanna lowball... and i dont know how much they go for... so im gonna say 50 dollars plus shipping to 98404??
let me know! thanks
Bigger yes. However, you'll need 15in. or bigger rims to fit the front calibers. 14in. should clear the rear calibers, but we're not sure about that.
Posted: Wed Apr 19, 2006 2:24 am
by Binford
Manarius wrote:Project_Legacy wrote:the front calipers are the 2 piston calipers correct? they should just be able to bolt onto an N/A car right?
the turbo rear calipers are bigger than the N/A rear calipers right?
what is a ballpark figure you would want for a set of front and rear calipers? i dont wanna lowball... and i dont know how much they go for... so im gonna say 50 dollars plus shipping to 98404??
let me know! thanks
Bigger yes. However, you'll need 15in. or bigger rims to fit the front calibers. 14in. should clear the rear calibers, but we're not sure about that.
I've had 14" XT6 wheels on the back of my SS in order to flat-tow it with no tranny. 14" wheels definately DON"T fit over the front turbo brakes.
Posted: Wed Apr 19, 2006 5:40 am
by greg donovan
mike i too would like to know how much for 4 of the wheels.
i would find a way to pick them up if i were to buy them.
shoot me a PM.
Posted: Wed Apr 19, 2006 8:52 am
by LegacyPGT
PM's sent to almost everybody
Posted: Wed Apr 19, 2006 8:42 pm
by stipro
PM'ed you. Thanks.
Posted: Tue May 02, 2006 9:49 am
by tleon
HI MIKE, DO YOU HAVE THE 4WD TURBO BADGE?
Posted: Tue May 02, 2006 5:14 pm
by Project_Legacy
i havent got another pm back from ya...
Posted: Sat Jun 03, 2006 4:11 am
by gregbolby
you still have any of the turbos left?
Thanks
Greg
Posted: Sun Jun 04, 2006 3:36 pm
by Radial GT1
I need an air bag computer and a (1) center cap for the 93 style rims. You sporting?