legacycentral bbs

I currently have a CES TBE with the BEP for the stock VF11 installed. I will be putting in a VF12. Will the BEP for the VF11 work for the VF12? I e-mailed CES Racing and he responded that they are not familiar with the VH12 there in Australia. Now, he did in fact say VH12 in his response. I wonder if he just misread my e-mail, VF read as VH, or what. I e-mailed him again and said that this VF12 I have came from Australia and they were used in the Liberty RS. Have not heard back from him yet.

The BEP that came with your system should work. If anything, the seperating flange may be slightly short if the VF 12 has a deeper turbine outlet/wastegate area but it will defintely work either way.

The other BEPs that I have are for the VF23. They have a longer seperator but it's also at an increased angle. I guess it depens on what exhaust housing comes on the VF12. If it's the same as the VF11 then I wouldn't worry about changing it. If it's the same exhaust housing on the VF12 as the VF23, then you might want to order one from Trevor ( I have two but they're both spoken for already).

I'm running the BEP on my vf8, which is probably identical to the vf12. You should be fine.