Page 1 of 1
predict my power now!!!!
Posted: Thu May 11, 2006 4:53 am
by thehookeup
G heads and intake mani, with the 550cc injectors? not sure what they are its whatever the g's came with , td04, fmic, 12 psi, walbro (not that it matters) any predictions or times on 1/4?
Posted: Thu May 11, 2006 5:15 am
by douglas vincent
I think they are 440 cc.
1/4 could be as bad as 15.5 if the setup is unhappy, as good as 13.8 if everything is very happy!
Posted: Thu May 11, 2006 5:24 am
by thehookeup
no way in hell could i pull a 13.8 if i did i would crap myself
Posted: Thu May 11, 2006 6:47 am
by douglas vincent
I use this site to estimate hp from 1/4 mile time and trap speed. Evne though its for RWD, it still comes out fairly close.
http://www.speedworldmotorplex.com/calc.htm
My 90 mph trap speed at 14.9 comes out at about 180 whp, 210 bhp. Which if you do the BHP at 75%, then you get 157.5 whp, which I dynoed at, or close enough.
Posted: Thu May 11, 2006 6:54 am
by douglas vincent
If I were to add 50 hp, or 12 psi, I should be at 13.89 at 96 mhp. Thats just a 50bhp increase. Or so goes the bench racing game.....
Posted: Thu May 11, 2006 7:07 am
by thehookeup
oh my god that link that you put in there brought back memories. i used to go to that track all the time when i lived in AZ, i used to play with that damn calculator all the time. hahaha , im still chuckling
Posted: Thu May 25, 2006 9:07 pm
by BAC5.2
Spray and chase the TD04 Subaru record
. I think the stock-turbo record is like 11.56 or something like that.
One of the guys at the shop ran a 12.2 on a stock turbo and trans. But that was on a built 2-liter and 8500 RPM... and a 100 shot.
Posted: Fri May 26, 2006 2:56 am
by THAWA
160-180 whp?