Page 1 of 1
Request: pictures of drivers side head
Posted: Thu Jun 08, 2006 3:27 pm
by tzedek
If anyone has a set of heads laying around or an engine or whatever could you get a picture of the backside of the drives side head? There should be a removable plate on there, thats what I am interested in. N/A head please. Thanks
Posted: Sat Jun 10, 2006 12:07 am
by napphappy
Im pretty sure its a plug not a plate. But I dont have any NAs around
Posted: Sat Jun 10, 2006 1:26 am
by mhrallyteam
No, the plate is on the passenger side head, for N/A's, and there is the turbo oil pick/return adapter on there for the turbo's.
On the driver side, aft of the head you only have a came seal/plug, no plate.
Posted: Sat Jun 10, 2006 4:39 am
by tzedek
I thought it was the driver's side head, but either way Id like a picture of the plate. I have turbo heads, and im wondering about swapping the n/a plate onto it for use in an n.a car. thanks
Posted: Sat Jun 10, 2006 4:32 pm
by tzedek
I looked at an N/A one, im pretty sure it would bolt on, but it wouldnt do any good becuase it wouldnt cover up the oil feed and return holes in the head.
Posted: Sat Jun 10, 2006 4:38 pm
by tzedek
pics for reference
also it is the pass. side head, makes perfect sense if you think about where the turbo is.
Posted: Sun Jun 11, 2006 12:49 am
by mhrallyteam
You could swap the plate and use it as an NA head, its supposed to fit. good luck
Posted: Mon Jun 12, 2006 3:49 am
by tzedek
It wouldnt cover up the oil feed and return holes...