Page 1 of 1
tranny swap
Posted: Sat Jul 22, 2006 11:27 pm
by Arturo
is it posible to put a legacy 95 and up transmission on a 90-94 legacy i know mechanicaly it will fit but what about the speed sensor and electrical connectors.
Posted: Sun Jul 23, 2006 6:18 am
by 206er
an at or mt? IIRC the at will be pretty difficult to swap because of different wiring setup, but the MT should be easy.
Posted: Mon Jul 24, 2006 12:03 am
by Legacy777
Again....AT or MT......
If AT, I believe you could use the phase 1 4EAT, but would have a hard time getting the phase 2 to work.
I believe the phase 1 4EAT was in the legacy until 96 or so.
As for the speed sensors, you can take out the electronic one and put in the mechanical I believe.
Posted: Tue Jul 25, 2006 4:05 am
by Arturo
its a AT tranny is from a fwd legacy that a friend has in his house and i wanted to put it on another friend's legacy wagon.