Page 1 of 1
what size are these ebay injectors?
Posted: Thu Jul 27, 2006 9:15 pm
by biggreen96
http://cgi.ebay.com/ebaymotors/FUEL-INJ ... dZViewItem
are these the grey tops from a twin turbo like redevil has? I sent a email to the seller as well, I just wanted the extra opinions
Posted: Thu Jul 27, 2006 11:31 pm
by douglas vincent
I think they are the same as mine, i think.....
But I would not buy them cause of the 0 feedback.
Posted: Thu Jul 27, 2006 11:34 pm
by douglas vincent
Posted: Fri Jul 28, 2006 12:12 am
by biggreen96
that auction is for just 2 555's
I want ~425's because it's near the 20% cut off. I will be doing a vf39 and a custom front mount intercooler. I want to join the 1 bar club.
Posted: Fri Jul 28, 2006 1:28 am
by douglas vincent
Whoops, missed that part!
Posted: Fri Jul 28, 2006 1:30 am
by douglas vincent
Posted: Fri Jul 28, 2006 8:03 pm
by biggreen96
those are just a bit bigger than I want. I remember reading on here somebody used ~440's and a vf39 on the stock ecu without issue and that is the route I'm interested in.
Posted: Mon Jul 31, 2006 9:42 am
by NICO
those first injectors you posted will not fit the rails from a ej22t or any north american subaru. australia and japan intake manifold only, or custom make the stock rails they come wit fit to work but you would need a lot of work.
Posted: Mon Jul 31, 2006 7:53 pm
by biggreen96
really? ?? cause I just bought them! gahhhh!
Posted: Mon Jul 31, 2006 9:41 pm
by douglas vincent
You bought these right?
They fit 91 NA rails, I think also 92-93
Posted: Mon Jul 31, 2006 10:01 pm
by biggreen96
yeah. I have the NA rails too already. So you are using your greys in NA rails right?
Posted: Mon Jul 31, 2006 10:23 pm
by douglas vincent
Yes.
Posted: Tue Aug 01, 2006 12:11 am
by biggreen96
Well then it appears that I'm on the right track...
Now to brush up on my aluminum welding skillz and whip up some endtanks for the f350 intercooler I have.
Posted: Wed Aug 02, 2006 4:25 am
by NICO
are you 100% they fit the n/a rials i have a set of 480cc injectors from a ej20k motor and they look the same and i mean the same.
ej25 ej18 ej20 n/a rials did not work with the injectors that look the same as the ones you just got.
i got pics
Posted: Wed Aug 02, 2006 7:51 am
by douglas vincent
I bought a twin turbo JDM motor and pulled the injectors out and stuck them in 91 AUTO fuel rails. And they fit. And they work. Thats the facts and all I know. And they are 430 cc.
Posted: Wed Aug 02, 2006 5:43 pm
by biggreen96
hey nico post them pics up.
Posted: Sun Aug 06, 2006 12:16 am
by biggreen96
well I just received the ebay injectors and they are in good shape. I'm amazed that he shipped them so quickly.
I bought a vf39 for $100 but it needs a little work, it's leaking oil...