IAC question
Posted: Mon Oct 16, 2006 7:23 pm
Hey so i recently had a CEL come on for 2 min and turn off with no noticable direct effect on operation. Pulled a 24 and a 32. Im running no cats so the 32 is on and off when it feels like it with or without the mech. fix.
My concern is the #24 IAC code. This is the first time its thrown it, it idles fine, and it clicks away in test mode. I have been having big problems trying to raise boost above wastegate pressure but i dont think its related to this.
What would my symptoms be of a sticky/failing unit?
Is there any good way to determine if the unit needs to be replaced? Also if i remove the solenoid off the top of the unit do i need to be aware of alignment like a TPS?
My concern is the #24 IAC code. This is the first time its thrown it, it idles fine, and it clicks away in test mode. I have been having big problems trying to raise boost above wastegate pressure but i dont think its related to this.
What would my symptoms be of a sticky/failing unit?
Is there any good way to determine if the unit needs to be replaced? Also if i remove the solenoid off the top of the unit do i need to be aware of alignment like a TPS?