legacycentral bbs

Posted: **Fri Nov 03, 2006 7:16 am**

I figure while Ive got my car in pieces I might as well get rid of the 4EAT harness.

Posted: **Fri Nov 03, 2006 7:51 am**

What do you mean? All the wires up in the dash and everything? Actually it doesn't really matter because I have all of it. Let me know what you want, I'm taking the heater core out of it so it'll be easy to get at.

Posted: **Sat Nov 04, 2006 12:51 am**

eeerrrmmm

Eveyrthing that goes between the engine and the ECU I suppose.

Posted: **Sat Nov 04, 2006 1:49 am**

Ok, what timeframe is there on getting this stuff to you? It's kinda cold so working on the car is slowgoing.

Posted: **Sat Nov 04, 2006 4:22 am**

2 months?

Posted: **Mon Nov 06, 2006 2:34 am**

Well I got bored today and got all of it out. There are two bad things though. I used this harness to swap in my 5MT, so it is missing the connector for the reverse lights/neutral switch. Second the wires going to the ignition were cut so I could make up a PNP harness for the clutch switch. Both of these could be easily fixed especially since it is out of the car. I followed Josh's write up for the 5MT swap so it is all on here for you to look at. Let me know what you want to do. Thanks

Posted: **Mon Nov 06, 2006 3:36 am**

So this is a converte 4EAT harness?

If thats what it is, im not interested, cuz thats what I already have

Posted: **Mon Nov 06, 2006 4:44 am**

No, it is a 5mt harness with the connector cut off so I could use it on my swap.

Posted: **Mon Nov 06, 2006 9:04 am**

How much do you want for it?

Posted: **Tue Nov 07, 2006 1:09 am**

I don't know. I already have it out and won't throw it away if you want it, so just give me an offer shipped. I'd figure no more than $15 for shipping.

Posted: **Mon May 14, 2007 1:40 am**

Bump this back up... I need one again

Posted: **Mon May 14, 2007 1:56 am**

What do you want to pay for it?

Posted: **Mon May 14, 2007 1:58 am**

I paid $100 for a JDM EJ20G bulkhead harness from Matt Monson... Id like to be somewhere around there. Keep in mind I dont need sensors or anything.

Posted: **Tue May 15, 2007 2:48 am**

Ha, finally threw mine away last week.

Posted: **Mon May 28, 2007 10:14 pm**

Im badly hurting for this guys!!

I need it to get to WCSS9!

Posted: **Tue May 29, 2007 5:13 am**

$100 will work for me...

Shoot me a PM

legacycentral bbs

WTB: 5MT Turbo Wiring Harness

WTB: 5MT Turbo Wiring Harness