legacycentral bbs

I need the U-piece of metal that holds the sway bar to the body. This U-clamp piece goes around the bushings on the sway bar itself, and hold it up against the body. It is a piece of metal, shaped in a U, with 2 bolt holes in it, and there are 2 of these for the rear sway bar.

I also need one of the bushings that goes into the sway bar itself, on the end. I have the stock sway bar, and one end has the bushing, but the other end doesnt, so it is just a hole about 1" in diameter. I need that round bushing that goes inside of this please!

--mark

I've got everything, including the mounts for the chassis.

http://www.main.experiencetherave.com:8 ... P_4051.JPG
http://www.main.experiencetherave.com:8 ... P_4052.JPG

I'll sell ya everything for $20 shipped.

Let me know.

http://www.main.experiencetherave.com:8 ... P_4052.JPG

The 2 bushings/u-clamps in the upper-right of that picture, outside of the bag, thats what I need (just the u-clamps, not the bushings inside.

I also need the round bushing that goes inside the end of the factory rear sway bar.

--mark

The ones you are talking about are for the front bar, and are on my car. I'd prefer not splitting up what's in the bag, as they'd be beneficial for someone without a swaybar.

i got it all, you can have em for 5 bucks

crawlerdan wrote:i got it all, you can have em for 5 bucks

PM sent!

--mark