Page 1 of 1

91 SS Parts FS

Posted: Thu Dec 14, 2006 7:23 pm
by head2wind
All parts (unless otherwise described) are from a Reo Red 91 Sport Sedan with a grey interior, USDM.
Prices are WITHOUT SHIPPING.
EDIT: Parts located Bellingham, WA 98226 (just north of Seattle)
EDIT: OBO on the parts, want them to go from my shop

Wiper arms: front wiper arms, good cond: $20 for both
Doors: LF, LR, RF, RR, w/ hinges, w/o door panels, w/ windows, GOOD Cond: $35 each
Trunk lid: w/ wing, w/garnish, GOOD Cond: $50
Tail lights: GOOD Cond: $40 each
Front Seats: OK Cond, no holes or tears: $40 each
Sun Roof: Complete system, needs to be resealed (as usual), glass good, seal damaged: $50
Interior Trim: Grab box of all the window/door pieces: $40
Center console: SOLD: 5MT mid trim (w/shift pattern emblem)
Center console: base trim and arm rest/storage: $20
Belt systems: door/window track, center retractor, 2 complete sets (one 91 set, one 94 set): $20 each
ABS controller: $20 (different than the 92(??)- 93-94, not sure where the split is on application although I know it will not play with the 94 ABS system).
Wheels: wheels are OK shape, some scrapes, good gravel/ralley wheels: $35 each or $100 for set
Wiring Harnesses: NA Dash harness, Main Aft harness, Secondary Harness that goes from sided to side mid passenger compartment: $20 each
Trunk and Fuel door cables: Cables with the control head: $10
Down Pipe: Excellent condition: $30
Exhaust system: from DP complete to muffler, excellent condition, appears almost new: $75
Muffler: OK shape, just needs to be welded onto your exhaust pipe: $10
Front Control arms: Good condition, grab a spare for your rally kit: $10 each
Rear differential: 3.9 ratio NON VLSD, functional, no noises: $40

Shifter: 5MT shifter system from a 97 Outback Sport, minus the trans knuckle, complete with rubber boot, aft frame mount, and shift lever, bushings in good shape. Should bolt right in to a Leggy: $40
Shift boot: boot and knob: $20
EDIT:
Brake Master/Booster: $25


I have some other stuff that I might be forgetting so PM me or email head2wind@gmail.com with your specific requirements. I don’t have any engine/trans stuff for sale other than what I listed. I am still looking for a set of :!: CAM GEARS FOR A EJ20G :!: So, anyone with a line on these please, please let me know so I can get closer to having a DOHC solution for my EJ22T.

If you want pictures or more detailed information let me know and I can email them to you.

Ken

Posted: Fri Dec 15, 2006 2:06 am
by dwreck30
What color is the shift boot and knob? Could you send pics to dwreck30@hotmail.com Thanks.

Posted: Fri Dec 15, 2006 2:35 am
by toomuch
I want the wheels and pretty sure I have the cam gears, where are you?

Posted: Fri Dec 15, 2006 5:57 am
by head2wind
The shift boot and knob are 91 interior USDM grey.

Posted: Fri Dec 15, 2006 11:10 pm
by AWD_addict
PM coming

Posted: Sat Dec 16, 2006 7:10 am
by head2wind
I am located Bellingham, 98226, just north of seattle wheels include well worn tires, and center caps.

LMK on the cam gears if you have them.

bumpity

Posted: Thu Dec 21, 2006 6:20 pm
by head2wind
I have all the 91 SS Grey interior parts, plus some 94 TW black A Pillar, and B Pillar. Various other parts that I am sure I am forgeting, let me know what you are looking for and I just might have it or can find it.

Posted: Fri Dec 22, 2006 1:59 am
by toomuch
Will you be down south anytime soon? Seattle/Tacoma/Olympia?

Posted: Wed Dec 27, 2006 10:47 pm
by head2wind
bumpity to the toppity.

Center console for a 91 SS, more stuff that you have to have :-D cause I what it to go from my shop to make room for my motorcycle....

Posted: Thu Dec 28, 2006 5:53 am
by Bimota_sb6r
is the exhaust system stock? if so do you have the dual crome tips?

Posted: Thu Dec 28, 2006 6:29 pm
by Psychoreo
any luck finding a 5mt pedal assy?

Posted: Fri Dec 29, 2006 7:33 pm
by head2wind
no I have not been back to the JY. wont be able to do that untill after the 2nd

Posted: Sun Jan 21, 2007 12:20 am
by head2wind
bump it up..
Lots of stuff and willing to deal.
email or PM

Posted: Tue Mar 27, 2007 12:30 am
by head2wind
bumpity

Posted: Mon Jul 30, 2007 10:54 pm
by head2wind
bumpit~