Page 1 of 1
Stripping 1994 legacy 5 spd.
Posted: Tue Jan 09, 2007 9:33 pm
by bvh56
Im Stripping a 1994 legacy 4 door sedan non turbo 5 spd. NOT available is engine/trans ,ecu , rear truck lid , tail lights, front fenders. Available is hood ,headlights, grill.all doors with glass, rear end 4:10 ratio, pedel box ect. PM or post questions. thanks. the color is burgundy the hood is gray.Not sure how to post pics on here.[/img][/b]
Posted: Tue Jan 09, 2007 10:27 pm
by entirelyturbo
Does it have ABS?
Posted: Wed Jan 10, 2007 1:17 am
by bvh56
Man I cant remember. Im at work, Ill check and post later.
Posted: Wed Jan 10, 2007 11:50 pm
by bvh56
No ABS sorry.
Posted: Thu Jan 11, 2007 1:36 am
by tonflo
Is the interior plastic trim black? Looking for piece that goes up driver's a-pillar & across top of driver's door. Sort of shaped like a curved hockey stick. Has to have the relief where the motorized seatbelt rides along.
Posted: Thu Jan 11, 2007 4:40 am
by Binford
subyluvr2212 wrote:Does it have ABS?
Not to hi-jack, but since his does not I've got an SS with ABS it looks like I'm parting out. What do you need?
Posted: Thu Jan 11, 2007 5:55 am
by entirelyturbo
Don't be sorry, I don't
want it to have ABS
Did you ever drive this car? Did you hear any wheel bearing noises?
Posted: Thu Jan 11, 2007 7:55 pm
by bvh56
Yes I drove the car. every thing is quiet and smooth. infact the car is still intact and drivable .however i just found out my my lower control arm is bent so i will be using the front suspension from the 94. If thats what you were asking for.
Posted: Thu Jan 11, 2007 8:07 pm
by bvh56
The trim is dark gray and light gray.
Posted: Fri Jan 12, 2007 2:19 pm
by entirelyturbo
Damn, so you're using the front hubs? I'm after left front and right rear hubs.
Posted: Fri Jan 12, 2007 6:59 pm
by bvh56
Yes i need the fronts , but im not going to use the backs.
Posted: Sat Jan 13, 2007 3:00 pm
by entirelyturbo
I might as well. How much you want for the right rear hub shipped to 32804?
Posted: Sat Jan 13, 2007 6:29 pm
by bvh56
Not sure how much it weighs? Ill sell it for $25 plus what ever shipping is. Car has 164,000 miles on it.
Posted: Sat Jan 13, 2007 6:29 pm
by bvh56
oops my zip is 60067
Posted: Sat Jan 13, 2007 7:14 pm
by entirelyturbo
Deal. You got my zip, get me a shipping quote, and I'll take it. Got PayPal?
Posted: Sat Jan 13, 2007 11:07 pm
by bvh56
I sent a PM
front hub
Posted: Thu Jan 18, 2007 12:55 pm
by bepa
were you able to locate a front hub? just got a 94 SS. will be parting out what not for drivetrain swap.
car was rolled over. will have top check hubs. what you offering for tha front hub. shipping is extra.
let me know if your interested. good hunting, be well, Daniel
Posted: Fri Jan 19, 2007 10:23 pm
by entirelyturbo
Unless your car doesn't have ABS (and I'm 99% sure it does), then I can't use it.
Well, I could, but I want one from a car without ABS.
front hub
Posted: Sat Jan 20, 2007 2:11 pm
by bepa
yes this one has ABS. would never think there was a need for non ABS hubs. could I ask what the need for a non ABS is? just like to learn something>
good hunting & be well. Daniel
Posted: Mon Jan 22, 2007 3:16 am
by entirelyturbo
The ABS knuckle has 1) a hole for the ABS sensor to mount to and 2) a different hub with a tone wheel on it for the ABS sensor to read.
I COULD use it, but for the sake of consistency, I don't want to.
Posted: Thu Jan 25, 2007 1:16 am
by wallgood358
I am interested in the front hub assembly if you still are looking to sell it
Posted: Sun Feb 04, 2007 8:41 am
by shemoves
any interior bits? looking for the plastic piece that surrounds the shift lever...I've got a '92 SS though, so I am unsure if they are the same.
Also, front axles available?
Posted: Thu Feb 08, 2007 1:09 am
by bvh56
already gone
Posted: Wed Feb 21, 2007 6:27 am
by entirelyturbo
bvh, I'm gonna PM you next week about the other rear hub. I'm interested if you still have it.
Posted: Tue Mar 27, 2007 2:39 pm
by HobbyWrench
Hi,
I've sent you a couple PM's regarding the brake power booster, and possibly the windshield.
It would be great if I could pick up the brake power booster within the next couple of days.
Thanks!
Mike