legacycentral bbs

Thats right, its all going! All prices CAD, not including shipping

Everything except for the carpet, front door cards and dash.

Its got the nice suede/leather seats, theres a small rip in the drivers seat bolster. The backs of the rear seats have been drilled for an amp, but its in the back, so who cares.

Aside from the obvious, this also includes rear seatbelts.

Also up for grabs, prices are negotiable:

Stage 1 Exedy Clutch with 2000km on it - $400
EJ22T heads (two sets) - $100 ea
EJ22T complete intake manifold - $100
EJ22T uppipe - $20
EJ22T downpipe - $40 - SALE PENDING
JDM TD04 (90 degree inlet pipe) - $120 - SALE PENDING
VF11 100K miles on it - $60
Legacy 5MT pedals - $40 - SOLD
Legacy shifter assm. including WRX leather boot - $50 - SALE PENDING
Airbox + MAF - $70
EJ22T Stock flywheel - $20
EJ20G RS-RA flywheel - $40
Red 98 DOHC RS manifold incl some sensors, throttle has been machined down for intercooler firewall clearance + throttle - $80
15" Outback sport wheels (same as legacy with polished rim), no curbage, some scratches - $120 - SALE PENDING
Legacy alternator - $50
Brand new 92-94 EJ22T waterpump - $70
EJ22T Oilpump within stock spec - $20
EJ22T Tensioner + bracket - $20
EJ22E Engine cover (no label) - $5
WRX engine mounts - $60 - SALE PENDING
WRX 5MT crossmember - $50
EJ22E 5MT - $250
EJ22T 5MT front diff - $50 - SALE PENDING
EJ22T 5MT center diff - $50
EJ22T tranny case - $20 - SALE PENDING
STI rear struts (red) - $150
EJ22T Turbo-Manifold piping - $20
Slant style intercooler - $40 front back - SOLD


More to come once me and my roomie look over the storage locker. We're pretty sure of what we need for our swaps now so we're getting rid of the extras.

You got PM'd

Splinter,

Any chance you guys have run across a 90-91 Legacy with tan interior with manual belts? If so I'd kill for all the trim, belts, etc to make it work in my legacy.

Give the guys at Saltair Auto Recycling a call

250-245-4175

They're in BC, a bit north of me

List updated

Do I ever get a present for guessing all the shit in that picture?

Let me know if you let the carputer go.

Oh crap I totally forgot about that!

Send me your address again, Ill get you something ASAP

Carputer wont be sold, I need it for the Standalone

ok I'd like to clarify a little about what was machined on the DOHC RS manifold... I did the machining myself.

The throttle body mounting surface was machined 1/2 of an inch

The throttle body itself was also machined 1/8 of an inch.

Also once I completed the machining, I noticed that the throttle linkage couldn't open 100%, so I ended up machining the linkage, and one of the intake runners to rectify this.

All of these mods were to allow just that little extra room for a top mount intercooler

Heres a few pictures of the finished product, after it was stripped, cleaned, and painted




The coil pack, injectors & rails, coolant reservoir, and my custom fuel manifold are NOT included.

The EGR Valve, Control Solenoid, and weird disk thing are included

1) would that ECM work for a 94 turbo wagon? and if so,
2) how much would you sell it for?

Is the JDM TD04 the same as the WRX turbo, just with a 90 degree inlet?

DTSJR wrote:Is the JDM TD04 the same as the WRX turbo, just with a 90 degree inlet?

Yes

BSOD2600 wrote:1) would that ECM work for a 94 turbo wagon? and if so,
2) how much would you sell it for?

I need the case from the ECU to put my new ECU into, so I could only sell you the actual board. But you can put it into the case of your fried ECU

I dunno

50 bucks?

may as well bump this thread.. cause some of my stuff is on it

RS25 wrote:may as well bump this thread.. cause some of my stuff is on it

cause I'll need to sell some stuff cause now revenue canada wants almost 700 back from me for last years tax return.. due mid FEB

Guys I really need to get rid of this stuff, Ill take offers.. I dont want to throw any of this stuff away!

I am very interested in the IC shipped to 85719. And am curious about the nipple on the end of the intake tube. Is that the line for the BOV? And by chance do you have the complete hose set up you mig be willing to throw in for a slightl raise in the price?

If the guy above me doesn't get the Intercooler I will take it

I have been on the hunt for an old school IC, so i dont think i will pass it up...lol

wallgood358 wrote:I am very interested in the IC shipped to 85719. And am curious about the nipple on the end of the intake tube. Is that the line for the BOV? And by chance do you have the complete hose set up you mig be willing to throw in for a slightl raise in the price?

Its for a BOV ya

ANd no, we dont have the hoses, my roomie ganked it from a junkyard modded legacy and didnt take the hoses as he was going to be using it on a different setup. Get a shipping quote for you tomorrow

interested in engine mounts, also possible front diff. what size gearing if you know it?

good luck with sell. did blackbart get his pedal box?

oh yea what turbo intake tubing are you talking about?

and prices to ship to 10463 if you could.

be well, Daniel

Its a 3.9, from a turbo.

Blackbart is taking the pedal box and the a-pillar trim

Ill get shipping quotes today

thanks guys!

that turbo is looking mighty tempting...what color is the interior? i need a rear deck

(i acquired a ss spoiler and don't need the third brakelight in the interior anymore)

Dark grey

Ive got some pictures to take tonight, Ill see if I can snap one of that.

ugh...i have the tan interior...grrr...my hunt continues for the rear deck! thank you

I think Ive answered all the PMs. Give me a shout again if I missed you, Im dealing with a lot