Page 1 of 1
clutch question
Posted: Tue Feb 27, 2007 2:32 am
by urabusturbo
I am in the process of swapping in a 95 5mt into my 92 ss and i have hit a snag with the clutch system. Im not sure how to make the ss clutch setup work on this newer tranny. Is the 95+ na trany a cable pull system? Or do i need to convert it? Any advice from somone who has had this issue would be great!
Posted: Tue Feb 27, 2007 7:16 pm
by Legacy777
If the newer transmission is a push style setup with a cable, you'll need to convert the clutch setup to a push style setup.
If you do that, I'd recommend converting to hydraulic vs. cable so you don't have to swap out the pedal box assembly. To do this you need the hydraulic slave cylinder, clutch fork, and need to move the pivot ball into the other boss in the transmission case. You may need to tap the other boss.
Posted: Tue Feb 27, 2007 9:05 pm
by entirelyturbo
Will the hydro clutch fork fit on a cable tranny? I didn't think it could.
Posted: Wed Feb 28, 2007 4:09 am
by Bheinen74
Posted: Wed Feb 28, 2007 4:49 am
by entirelyturbo
I deserve that, I guess...
