legacycentral bbs

North West Serivice Group will be changing locations over the summer, and to prevent moving what appears to be 40 cars, we are parting out all of them, on the cheap!
we have several late 80s gl-10 turbo cars, close to 15 of them, in manual and auto versions. we have xt turbo and xt-6 parts, impreza parts, about a dozen early 90's legacies, including a turbo sedan that we will be parting out .

we have motors, transmissions, rebuilt motors and transmissions, suspension parts, complete cars that run and drive

if its 80s or 90s subaru, chances are we have it. we need to sell as much as possible as soon as possible-discounts will be given to multiple part orders, shipping is avail at your cost, no refunds, but exchanges can be negotiated

we have been serving the portland area for over 5 years and are expanding!! take advantage and save on parts!!

please call dan at 541-324-4730 from 9am-6pm
or the NWSG Office at 503-283-0207 from 9am -6pm

please call or email for part availiability and pricing

Any 00-04 Legacy parts?

not right now, we mainly are getting rid of gl, dl, xt, loyal, and early legacy stuff, we hope to be into newer cars in the new shop, infact thats why we are clearing current inventory. we do have a 96 impreza coupe if that helps you

and a 98 ob wagon

I am looking for a solid 4.11 tranny and also a good 2.5 phase I short block.

I will call tomorrow with those requests and anything else I trick myself into thinking I need this evening.

we might have all your requests:D

Can we see this stuff in person?

yep, infact, i encourage everyone to come down and take a walk around the lot, as i cannot by any means, list all we have-all i can do is tell you that if you need it, chances are its there

Where are you located in Portland? Address?

10504 nw st. helens, portland-97231

I remember that place. The old mill has atmosphere.

is that what we are calling it these days??? hahahahahahaha

I am in need of some rear lateral links off of a 1990-91 with droplink mounting tabs. Would you possibly have any rear top hats that would be stiffer (comparable to grounN sti top mounts) as I am going to be doing a suspension job and want some stiffer/harder top hats to keep the bounce down.

we have the links, the tophats would be a crap shoot-i encourage you to come look

I need the driver's side (but will take both) sun visor in grey for a 92 Legacy (should all be the same), with the hardware (yay, screws) if possible. Shipped to CA?

Do you have the passenger side front turn light and chrome strip for the front of a 92 93 94?

sybir wrote:I need the driver's side (but will take both) sun visor in grey for a 92 Legacy (should all be the same), with the hardware (yay, screws) if possible. Shipped to CA?

HAVE THOSE, BUT I BET YOURS are better

smh0101 wrote:Do you have the passenger side front turn light and chrome strip for the front of a 92 93 94?

yep, but i need you to define chrome strip more

crawlerdan wrote:we have the links, the tophats would be a crap shoot-i encourage you to come look

Well I am up in bothell (seattle), and am not coming down for subiefest? maybe if you could look for some tophats I could give you a few extra bucks for your time. I'll take the links though. How much for them shipped to 98021?

links are40.00 a pair if you pull em
otherwise they are 75.00 a pair shipped

crawlerdan wrote:

smh0101 wrote:Do you have the passenger side front turn light and chrome strip for the front of a 92 93 94?

yep, but i need you to define chrome strip more

The strip that is on the front bumper that is specifically on the black trim peice. The strip that many of these cars are missing or have blacked out.

YA WE HAVE A FEW, COME ON DOWN AND YOU CAN HAVE IT

crawlerdan wrote:

sybir wrote:I need the driver's side (but will take both) sun visor in grey for a 92 Legacy (should all be the same), with the hardware (yay, screws) if possible. Shipped to CA?

HAVE THOSE, BUT I BET YOURS are better

I don't have one on the driver's side, so I'd take that bet

ok then, 20.00 for the pair

Do you have a IAC valve from a turbo motor???