When I TURN O NO
Posted: Fri Apr 20, 2007 10:16 pm
I get a grinding sound when i turn tight like a u turn
legacycentral bbs
A forum for 89-94 BC-BF(BJ) Legacy Owners and Fans
https://bbs.legacycentral.org/
When I TURN O NO
Page 1 of 1
Posted: Fri Apr 20, 2007 11:23 pm
get the car up in the air and spin all the wheels and see if there is any brake drag. Then turn the wheels and spin them, see if there is any tension. Sounds like the differential possibly, if there is no oil of course
Posted: Sat Apr 21, 2007 1:14 am
Only when you turn? I'd call it an axle.
Posted: Sat Apr 21, 2007 1:23 am
Or possibly a wheel bearing. If it's just starting to go, it would only grind when put under high load.
Posted: Sat Apr 21, 2007 5:25 am
It just started so lets see what haps on the way home... im 30min from home i hope i make it 
Posted: Sat Apr 21, 2007 3:35 pm
I bet it's an axle and I highly doubt it would up and fail in 30 minutes of driving.
Posted: Sat Apr 21, 2007 8:28 pm
I had a lovely grinding noise last week after turning out of a parking spot. Got out to look and my right wheel was grinding against the wheel well! Turned out someone had stripped the bolt that went through the knuckle. This caused the pinch bolt for lower ball joint to fail and it popped out of knuckle. Good thing that didn't fail while I was driving down the highway...