legacycentral bbs

Hey guys,

I have 94 touring wagon. I recently blew my passenger side front strut while up camping.

I am wondering if an 04 Forester XT suspension would just bolt up? I wouldn't mind gaining a bit more ground clearance.

I have read the stickies, but there is nothing solid in there about this setup. I also searched, but didn't come up with anything.

I'm open for other ideas also.

Thanks in advance for any input!

Hey Dave,
I'm in the same boat
I think that I've blown ALL my struts though.
They are KYB GR2's I've had in since '99.
I was thinking 'bout replacing them with the same to keep
the same ride height. I am open for in-put or suggestions.
Goal is to corner flat on the track but still have enough
ground clearance for here in Colorado

siouxbe wrote:Hey Dave,
I'm in the same boat
I think that I've blown ALL my struts though.
They are KYB GR2's I've had in since '99.
I was thinking 'bout replacing them with the same to keep
the same ride height. I am open for in-put or suggestions.
Goal is to corner flat on the track but still have enough
ground clearance for here in Colorado

Hey there buddy! I ended up going with KYB AGX's and stock springs.

All 4 of my stock struts had no compression left in them.

So far I am pleased with the setup.

Hmm. With the AGX's I can adjust the struts so that they are like the GR2's or hard? or soft? Will they react like the GR2's is the real question? Thanks

agx's will be slightly stiffer than gr2's I believe at the softest setting. i like mine a lot.