legacycentral bbs

Posted: **Wed Nov 14, 2007 2:32 am**

Well kids, my build is taking a different direction and now I've got some extra stuff to sell...

I will only be accepting PayPal & money order payment options. Please add 3% for PayPal transactions.

My inability to make up my mind is your gain! I purchased a WRX hood scoop & matching air diverter plate 3 weeks ago, cut my hood to fit them and THEN decided to go with the FMIC that came with the car when I bough it... Stupid move, I'm aware.
'02/'03 WRX silver hood scoop and matching air diverter plate
SOLD SOLD SOLD

Also, when I purchased my car, the PO purchased a MBC from eBay. It's a generic model, but I had my friend test it out on his WRX and he confirms that it works just fine. So other than being tested, it's brand new.
SOLD SOLD SOLD

Lastly, I'm parting with my brand new T3/T4 hybrid turbo. I got a deal on a 16g I couldn't pass up, so I no longer need the other one. I will also send along a mild steel flange for the U/P side of the turbo.
$150 plus shipping or $165 with flanges & U/P

Posted: **Wed Nov 14, 2007 3:11 am**

PM'd on the turbo

.

Posted: **Wed Nov 14, 2007 6:01 am**

Lee, PM'd you back.

The turbo was $250, but I priced it low to sell quick. Just trying to round up the last bit of cash I need to finish up my build so I can drive the car very soon.

For an extra $25 I have a U/P that a local shop made with the T3 flange on one end and a close to Subaru style flange for the exhaust manifold on the other end. It fits up, but it's a bit over sized and the end of a stock U/P should be mated to it instead. The PO paid a local shop to do the work.

Posted: **Wed Nov 14, 2007 3:09 pm**

Jason, PM'd you back.

I guess I got a little excited and started putting the cart before the horse. After looking into things more, this turbo is not what I feel I should be going after.

Thank you for the response and best of luck selling this turbo. You're offering one heck of a deal.

Posted: **Wed Nov 14, 2007 8:35 pm**

Pictures are up now...

Posted: **Tue Nov 27, 2007 3:42 pm**

**bump to the top**

Price lowered on the turbo...

Posted: **Thu Jan 03, 2008 3:21 am**

Got the scoop today! Looks perfect, packaging was great. Very happy, thank you!

Posted: **Thu Jan 03, 2008 5:57 am**

Great, glad to hear it Ben. Enjoy! Now I'm left with a large hole in my hood until I pick up an N/A hood in a few weeks.

Posted: **Thu Jan 03, 2008 2:39 pm**

What psi and power is that turbo good up to?

Posted: **Thu Jan 03, 2008 3:02 pm**

Honestly I'm not sure, but PacmanSTi was using a Garrett style T3/T4 on his car (BAC5.2's old car) and I'm not sure what PSI he was running, but he was well over 300hp w/ that turbo, larger injectors, & a TurboXS Dtec fuel controller.

Posted: **Thu Jan 03, 2008 3:52 pm**

I have used the boost controller shown above.

I had to change the "t" to get it to boost I wanted, but I was able to make this into a 2 stage controller (low boost = WG pressure, High boost = PSI level set on bleed valve) with a switch & soleniod.

It was the lowest cost 2 stage boost controller I ever had!

Posted: **Thu Jan 03, 2008 3:57 pm**

Yeah, it looks like a good one to use. It was packed in a box with the car when I bought it. I purchased a TurboXS MBC not knowing I had one & the found this one afterwards. I'm not looking to get mondo cash for it. Mainly pass it along to someone who could use one for a good price.

Posted: **Thu Jan 03, 2008 4:01 pm**

I also have a Greddy style BOV for sale too.
The t-pipe is not included since I'll be utilizing that on my car.
Price $22 plus shipping

Posted: **Sat Jan 05, 2008 11:50 pm**

Dropped the price of the turbo... Now $150!!
C'mon people, it has 0 miles on it... Can't someone use it???

Posted: **Tue Jan 08, 2008 5:56 am**

I guess how much for the turbo and flanges/up-pipe to 97501.

Thanks,
Matt

Posted: **Mon Jan 28, 2008 1:37 am**

bump ttt

Posted: **Mon Jan 28, 2008 1:58 am**

same to 99507?

Posted: **Mon Jan 28, 2008 6:21 am**

Shipping will be right around $17.25 to most states via UPS. Anything above that I will eat the cost. Also add 3% for PayPal fees.

Posted: **Mon Jan 28, 2008 6:40 am**

I WANT THE BOOST CONTROLLER!

and whats better... a recirc or the BOV?

and uh.... yeah

it's easier to install than a intercooler right

Posted: **Mon Jan 28, 2008 6:45 am**

This one can do either. You can put a hose on the end and recirc it back into the intake.

If you'd like both it would be $48.95 plus 3% for PayPal (or I accept money order, but of course PayPal is faster).

Posted: **Mon Jan 28, 2008 6:56 am**

I'm wondering how I would find a downpipe to work with that turbo... also is it internally gated, or do I need to fab that up too?

Posted: **Mon Jan 28, 2008 1:24 pm**

I've seen flanges on eBay for sale that have the wastegate flap installed on or you can go with the external wastegate that Y's off the pipe.

Posted: **Mon Jan 28, 2008 8:17 pm**

dropdfocus wrote:This one can do either. You can put a hose on the end and recirc it back into the intake.

If you'd like both it would be $48.95 plus 3% for PayPal (or I accept money order, but of course PayPal is faster).

i think for now i'll just take the MBC

i would MUCH rather paypal also...so address..?
i'll pm you

Posted: **Mon Jan 28, 2008 8:49 pm**

Manual Boost Controller sold...

legacycentral bbs

New T3/T4, new MBC, & BOV

New T3/T4, new MBC, & BOV