legacycentral bbs

I'm selling a set of DOHC heads & intake manifold from a JDM WRX EJ20G.
The heads are complete & include cams, v-covers, & all 4 cam gears.
The intake is bare, but all your ej22t parts (t-body, injectors/rails, IAC) should bolt right up.
I'm looking to get $300 picked-up for the heads/manifold, but will ship @ buyers expense.

EDIT: I just got a timing belt cover, & idler pulleys that I'll add to the above for an additional $30

So a pretty complete DOHC conversion will be $300-330 (depending on if you want the covers/idlers) picked up, or $300-330 + shipping costs if you are not local.

PM me an e-mail address if you want pics

PM price shipped to 92530 please.

Thanks

EJ22T fuel rails WILL NOT bolt onto a DOHC manifold...


Just FYI

Will the intake manifold fit EJ25D heads? If so, I'm interested in a price. Thanks.

Opps - you're right, but I believe the SS injectors can be used on DOHC rails.

Note: These are the updated WRX EJ20G heads, not the older Legacy EJ20G rocker arm version.

Got timing belt cover & idler pulleys so I edited the ad to reflect this

I forgot to mention the obvious - these heads have oil provisions for the turbo stock as they came off a WRX.

Opps - you're right, but I believe the SS injectors can be used on DOHC rails

Sorry man - they dont.

BB

I thought & still think the pink 370's would work, as folks use the grey EJ20G 440's on ej22t's without mention of swapping rails etc. (like what has to be done when using STi Yellows on the ej22t), but you never know what works until you tried to intall these pieces for yourself.

If the pinks do not fit not then some DOHC injectors would have to be tracked down, but just about everything else is here for a DOHC conversion!

Still available, waiting for a new home on a ej22t.

SOLD.