Page 1 of 1

JDM 440cc WRX Grey injectors

Posted: Sun Nov 25, 2007 7:04 pm
by BXSS
For sale is a set of 4 Grey 440cc WRX injectors for $75.

Posted: Mon Nov 26, 2007 3:16 am
by beatersubi
Those are side feed, right? Will they work in ej22t rails?

Posted: Mon Nov 26, 2007 3:40 am
by livestrong14
no, 92-94 NA fuel rails though.

Posted: Mon Nov 26, 2007 3:43 am
by dropdfocus
Heck of a deal guys. I sold the set I had for $100. Someone help Carlos out and purchase these.

will fit '91 ej22t rails

Posted: Mon Nov 26, 2007 3:57 am
by kleinkid
These injectors were a direct fit into my 1991 stock EJ22T rails. I was told that they wouldn't, so bought some 92-94 na rails. They would not fit into the 92-94 na rails. They did, however, fit into my 1991 stock EJ22T rails.

Posted: Tue Nov 27, 2007 1:13 am
by 555BCTurbo
livestrong14 wrote:no, 92-94 NA fuel rails though.
Wrong!


90-91 Automatic Rails...


But yes, as John mentioned, they do fit the EJ22T rails with some crafty o-ringage

use correct and all o-rings, seals

Posted: Tue Nov 27, 2007 2:38 am
by kleinkid
The 440's I bought were refurbished and came with some new o-rings, but not all of them. They each came with the same ones but needed more. I use the parts pages to determine which ones were not included, and bought those from Jamie. All I did was look at the diagram and figured out which ones I did not have. Arrons gave me some 90-91 na rails with injectors in them to compare. The EJ22T injectors, and the 90-91 na injectors had the exact same o-rings, and seals, internal and external dimensions of the rails were the same. So, I used my EJ22T rails, because I had already cleaned them. No tricks involved.

Posted: Tue Nov 27, 2007 2:44 am
by livestrong14
555BCTurbo wrote:
livestrong14 wrote:no, 92-94 NA fuel rails though.
Wrong!


90-91 Automatic Rails...


But yes, as John mentioned, they do fit the EJ22T rails with some crafty o-ringage
THANKS! I was going off of one of your old posts a few months back. Guess I should gather my info from higher sources than yourself.

Posted: Tue Nov 27, 2007 3:35 am
by smh0101
livestrong14 wrote:
555BCTurbo wrote:
livestrong14 wrote:no, 92-94 NA fuel rails though.
Wrong!


90-91 Automatic Rails...


But yes, as John mentioned, they do fit the EJ22T rails with some crafty o-ringage
THANKS! I was going off of one of your old posts a few months back. Guess I should gather my info from higher sources than yourself.
NICE!!!

Gettin Some Burnage! rotflmao

Posted: Tue Nov 27, 2007 4:17 am
by kleinkid
Oh hell, Nick taught me everything I know. I just can't remember what it is now!

Posted: Tue Nov 27, 2007 6:55 am
by SemperGuard
livestrong14 wrote:
555BCTurbo wrote:
livestrong14 wrote:no, 92-94 NA fuel rails though.
Wrong!


90-91 Automatic Rails...


But yes, as John mentioned, they do fit the EJ22T rails with some crafty o-ringage
THANKS! I was going off of one of your old posts a few months back. Guess I should gather my info from higher sources than yourself.
Hahaha

Posted: Thu Nov 29, 2007 2:43 pm
by BXSS
SOLD.

Posted: Thu Nov 29, 2007 8:16 pm
by 555BCTurbo
livestrong14 wrote:
555BCTurbo wrote:
livestrong14 wrote:no, 92-94 NA fuel rails though.
Wrong!


90-91 Automatic Rails...


But yes, as John mentioned, they do fit the EJ22T rails with some crafty o-ringage
THANKS! I was going off of one of your old posts a few months back. Guess I should gather my info from higher sources than yourself.

That was before I reprised myself with the correct information, by actually installing them...


My learning curve is not flat you know Devan...and I like to try things and learn what works and what doesn't...and you seem to be a direct beneficiary of my experiments a lot of the time, so I wouldn't slam me for correcting some misinformation...even if it was based upon something I said previously...and honestly, with all of the help that I have given you in the past, especially with making your car as fast as it is...and you calling me begging me to drive up and wire your PP6...what you said about getting information from a "higher source" is kind-of demeaning...

[/end rant]


(I was a little abrupt with the "wrong", and for that I apologize.)

Posted: Fri Nov 30, 2007 12:15 am
by livestrong14
Thanks for the apology Nick. I appreciate the help you have done for me in the past. Think of what I have done for you aswell. Think about our shop, and what you have given you in the past. I don't see asking you politely to help install the PP6 begging. And honestly, I would rather have Davey or Brydon do it. But I have no beef with you. It is just the way you say things. Both in person and on the forums. I have found that if you are a generally nice person in life, good things happen.

Posted: Fri Nov 30, 2007 12:27 am
by Adam West
Teletubies say, "Big Hug"!!

Who bought these?

Posted: Fri Nov 30, 2007 2:34 am
by Imprezive
Web-Drama

Posted: Fri Nov 30, 2007 3:22 am
by livestrong14
I agree it's retarded.