legacycentral bbs

I was going to do a seperate stock engine for my legacy, but schools pricey and I'm just rebuilding my original. So now I wont need to double up on my rebuilding parts/stuff...


Legacy Parts:


-----------USED, but excellent shape:

One Black Top fuel injector left... Rebuilt and cleaned by Witchhunter Performance... Have flow chart... $20 + $8 shipping

Two Pink Top fuel injectors left... Rebuild and cleaned by Witchhunter Performance... Have flow charts... $40 + $8 shipping

Left, Rear *Drivers-side* Spindle, cleaned, checked and repainted... $30 + $10 shipping

Stock EJ22T Engine Mounts... $40 + $15 shipping

EJ22T/EJ22 passenger side, rear timing cover *10 + $5 shipping

EJ22T Hydraulic Clutch Master Cylinder *25 + $10 shipping


==========================================
Has 160k miles, but in good shape
==========================================
Stock Turbo Manual Trans Mount $10 + $10 shipping

Stock EJ22T rotors, $40 + 20 shipping

Stock EJ22T water pump *core or install seals*$20 + $10 shipping

Stock EJ22T oil pump *core or install seals*$30 + $10 shipping

Stock linkage (I'd throw in a bushing set, but not all rusted or broken) *free + $15 shipping
==========================================

WRX Parts:

13,000 mile, used 2003 WRX spring set $35 + $25 shipping

(Top Mount) Intercooler from same WRX, Fins are beautiful. $70 + $15 shipping.

============================================
Stock EJ22T Crankshaft... *SOLD 03-10-08*
Balanced set of EJ22T rods *SOLD 03-10-08*
Stock EJ22T headgasket pair... *SOLD 03-10-08*
Stock EJ22T Pistons *SOLD 02-23-08*
Man Trans Front Axles *SOLD 02-24-08*
Gatorback timing belt... *SOLD 02-24-08*
Toga brand Bearings... *SOLD 03-03-08*

============================================


-

im interested in the pistons how much if shipped to 00969 in PR

Arturo wrote:im interested in the pistons how much if shipped to 00969 in PR

pm sent

I've got a pretty good bead on the shipping prices, but if you've got a better idea of a price *reasonable ofcourse*, let me know what you'd like to pay.

Oh and the other type of timing belt is a "Proline" brand. I've looked at all three I have *including the one I'm installing(all are different brands)* and there isn't a difference in anything but the printed name on belt and belt price...

I've updated the prices a good bit.


Thanks,

Ken

Are the HG's factory, Felpro, etc.? I am very interested.

They're stock replacement... I forget what brand they are, but aren't high performance.. or I'd want a bit more for em..

are those engine mounts new?

If the pistons are still available, I'll take 'em! PM me your info to pay for them...

pm sent

Turbo pistons are sold to me. Yay!

kingston wrote:are those engine mounts new?

no, used, but in fine shape ^^

dropdfocus wrote:Turbo pistons are sold to me. Yay!

Yup, hehe, they'll ship monday morning!

thanks!

Rods, crank & head gaskets are on hold for me... THANKS!!!

what huh wrote:pm sent

Sold Axles and Gatorback Timing belt to What huh.. ^^

thanks

Sweet, you're getting just about everything sold!

dropdfocus wrote:Sweet, you're getting just about everything sold!

except I gotta break a little bad news to What Huh.. I cannot find the rear axle shaft for the life of me.. hmm. I think a buddy may have recycled it... I was able to find the front two, no prob, but the rear has gone missing.. I'll send him back the money for that one. Sorry What Huh.....

What Huh:
Your front axles and timing belt will ship monday though.. I'll talk to a few people about getting the rear axle... Gotta keep an eye out for those things, they're getting pretty rare.

Dropdfocus:
Your Pistons will ship monday, luckily they didn't get recycled!
-Ken

k no prob i was just going to get it rebuilt anyways there is a subaru dealer about ten min from my house

what huh wrote:k no prob i was just going to get it rebuilt anyways there is a subaru dealer about ten min from my house

Just sent your refund for the rear axle.

-Ken

Sweet! I'll have the money for the other stuff in a week or so. Thanks!!!

I listed the bearing set on ebay with no reserve...

http://cgi.ebay.com/ebaymotors/ws/eBayI ... 43544&rd=1

Have fun...

Shipped out the parts so far, I'll supply the tracking numbers here in a bit.

It'll take a day before they update the current status of em though, the packages arrived at the ups drop off just after the UPS truck took off and since this is a one horse town, the ONE post office that was open, is closed almost all day, since the delivery person IS the only employee there.. haha....

will pm with tracking numbers..

thanks guys

I'm interested in the "13,000 mile, used 2003 WRX spring set $35 + $25 shipping "

will this do anything for the ride height / handling of my 91 SS? thanks!

Likely lift the rear 1/2", but it will increase handling a bit better than you stock springs did.

Boostedballs wrote:I'm interested in the "13,000 mile, used 2003 WRX spring set $35 + $25 shipping "

will this do anything for the ride height / handling of my 91 SS? thanks!

I've no clue ^^ I was going to put them in, but It's been so long since I've driven the car, I wanted to get to know it with good struts, before I make a decision on sway bars/springs.. so yeah, they're still up for grabs.. ^^