Page 1 of 1
where can I find front reinforcement and bumper cover?
Posted: Fri Dec 07, 2007 7:12 am
by Trace
I've tried numerious places e.g. online, google, autoparts canada, even local junk yard for a used/new front bumper cover and front reinforcement but have no luck so far... there were plenty of NA parts but not so much for a Turbo model.
I'll try calling subaruparts.com tomorrow but in the mean time where do you guys usually get your bumper cover/ steel reinforcements from?
Thanks!
Posted: Fri Dec 07, 2007 10:26 am
by ciper
Other than outward appearance what is wrong/different with an NA bumper beam and cover?
Posted: Fri Dec 07, 2007 7:49 pm
by Trace
that's the part i don't get. I asked the body shop the same question they said the NA curves in more at the bottom. (Or the turbo does... i forgot which).
is this true? i could save lots $$ if its the same..

Posted: Fri Dec 07, 2007 7:55 pm
by ciper
Sure it looks different but from what I know they are interchangeable.
Here is some "proof"
http://bbs.legacycentral.org/viewtopic.php?t=33683
Posted: Fri Dec 07, 2007 8:56 pm
by skid542
My 93' SS has an NA bumper on it. It looks a little rough and is tilted down slightly due to the front end collision it was in but other than it looks fine.
But I have full intentions of just putting another NA bumper on it due to ease of procurement.
Posted: Fri Dec 07, 2007 11:59 pm
by Trace
that sounds good! but is it a direct bolt on for the NA bumper? since the Turbo bumper is rare and much more expansive i'll just stuff it on a NA bumper as long as its possible....
Posted: Sat Dec 08, 2007 12:19 am
by Trace
i found this on ebay:
http://cgi.ebay.com/ebaymotors/SUBARU-L ... enameZWD1V
however, its a reinforcement for a 91 turbo touring wagon. would a wagon reinforcement fit onto a 94 turbo ss?
thanks.
Posted: Sat Dec 08, 2007 1:37 am
by dscoobydoo
I have a 93 SS and we mounted the JDM fogs to a NA bumper beam. Then we put the turbo skin back on.
The SS and NA beams are the same.
Now good luck for finding the turbo skins though
Posted: Wed Dec 12, 2007 11:18 pm
by Trace
thanks, but if i can't find a turbo cover i'll just forget about it and put a NA on. NA's not bad looking as right now i'm driving around town with a half hanging beam it looks retarted. can't even get a date with that!
Posted: Wed Dec 12, 2007 11:30 pm
by evolutionmovement
I have an nearly new unpainted 1993 turbo bumper skin and styrofoam beam. Shipping might be a killer, though.
Posted: Thu Dec 13, 2007 1:02 am
by Trace
over $100?
are you going to install it or its just sitting there? If I can't get a hold on anything over the next month you'll see a pm poping up : )
Posted: Thu Dec 13, 2007 1:13 am
by evolutionmovement
Well, you're talking cross-country and international. I stripped it off a parts car. My car's a 1990, so it's not much good to me beyond decorating my work shop.