Page 1 of 1
justy 5 spd
Posted: Tue Feb 26, 2008 3:44 am
by 1991legacyturbo
will a justy 5spd trannie work in a 1991 LEGACY TURBO??
Posted: Tue Feb 26, 2008 3:47 am
by PhyrraM
Nope.
The Justy is a transverse mounted engine.
Posted: Tue Feb 26, 2008 9:38 pm
by DLC
The Justy was made, for Subaru, by Suzuki.
Will not work.
Posted: Tue Feb 26, 2008 9:41 pm
by smh0101
But you could use a legacy 5mt in a Justy!
by EJ swapping it...

Posted: Tue Feb 26, 2008 9:49 pm
by DLC
Eventually, after you made an engine cradle and bashed the firewall in for the bell housing, etc...
Posted: Tue Feb 26, 2008 9:50 pm
by smh0101
Can you imagine an ej257 swaped justy
Holy Crap!
Posted: Tue Feb 26, 2008 10:30 pm
by dropdfocus
smh0101 wrote:Can you imagine an ej257 swaped justy
Holy Crap!
**DROOL**
That would be insane!!!!!
Posted: Tue Feb 26, 2008 10:48 pm
by DLC
...and a mess. A stripped GC would be much stiffer and much, much easier to do.
Posted: Tue Feb 26, 2008 10:49 pm
by dropdfocus
Aw come on, no imagination...

Posted: Tue Feb 26, 2008 11:32 pm
by ericem
Isn't a justy like SUPPER light though?? I mean I have heard of justy's with the EJ20 swapped in.
Posted: Wed Feb 27, 2008 12:05 am
by smh0101
I've heard of one before...
Totally insane.
Posted: Mon Mar 03, 2008 5:54 pm
by BXSS
Someone actually swapped a 02ish WRX drivtrain into a Justy.
It was AWD & ran low to mid 12's on the stock WRX motor.
Search for WRX swapped Justy or something like that to find the web-page. The page has alot of pics & info on the swap.
I was actually thinking of making a RWD, EJ powered, back halfed (rear 1/2 of the car tube framed) Justy as it is basically the same as the KP61 Starlets 5-6 of my friends run now.
Posted: Mon Mar 03, 2008 6:06 pm
by All_talk
Forget the Justy... 2.5 6-speed STi swap in a 360!
Gary
Posted: Mon Mar 03, 2008 6:26 pm
by dropdfocus
Blasphamy!!!!! I'd never tinker with an authentic 360 (our local dealership has one from the first production runs).
Posted: Mon Mar 03, 2008 7:41 pm
by BXSS
A Crazy friend of mine recently wound up with a 360 Van.
He wants to put a motorcycle motor in it....
Posted: Mon Mar 03, 2008 7:47 pm
by 555BCTurbo
BXSS wrote: KP61 Starlet
That is going to be my first rally car...
with 3sge power

Posted: Mon Mar 03, 2008 8:50 pm
by All_talk
BXSS wrote:A Crazy friend of mine recently wound up with a 360 Van.
He wants to put a motorcycle motor in it....
Thats begging for a mid engine swap with a FWD 5-speed. You could do it on the cheap with EA82T.
Gary
Posted: Tue Mar 04, 2008 2:32 pm
by BXSS
He is a crazy Puerto Rican that had a KP61 Starlet with a Starion engine swap (in the mid '90s) who's boost control was leaving the wastegate disconnected....
I hope he leaves the thing alone, but he is too much of a speed freak to do that so I can see him putting a bike motor in.
360s have a rear mounted 360cc 2cyl engine (?-hp), so putting a bike motor in should easily triple HP (600cc sport bikes make 100WHP these days).
?- Rear diff, but I got the impression he wanted to mod a rear from a quad as this would get him chain drive & is about the right track width.
I never knew KP61s were popular rally cars until I got a rally vid from Europe & saw KP after KP running.
Again I hope he just leaves the thing alone as it is supposed to be pretty clean.