legacycentral bbs

Posted: **Thu Feb 28, 2008 8:16 pm**

I have to get this lump off my trailer so I can use the trailer again! I'll be taking the hulk to the scrapyard next week, so if anyone needs bits let me know now!

What's gone already:
Rear diff
Engine, harness, ecu
Hood, front bumper, LF fender and LF door
Wheels
Crossmember
Front corner lights

Still have:
Auto trans TCU $35
Radiator with dual fans $80
Brakes, all $150
Power sunroof
RF fender, Rio Red $40
LR door, complete $65
Front grill with emblem $25
Trunk with spoiler $75
Steering rack $50
Stock struts/springs $25 each
Rear axles, each $50
Front axle $60
Dash, complete w/instuments, radio, etc. $80
Rear taillight assemblies $30 each
Front headlights $30 each
Front turn signals (in lower bumper) $20 each
Entire dash - grey color
Windshield washer bottle $15
Radiator overflow tank $15
Misc junk still attached to car...

All plus shipping/freight!
dave@davesport.com
425-888-4444

Posted: **Thu Feb 28, 2008 9:25 pm**

does the rack have inner tie rods that are in good condition?

Posted: **Thu Feb 28, 2008 9:57 pm**

boro wrote:does the rack have inner tie rods that are in good condition?

They seem to be in good contition - there was no slop in the steering wheel. If there's something else you want to to check let me know.

Posted: **Thu Feb 28, 2008 10:54 pm**

Are those fog lights the factory units that replace the turns under the bumper?

Jeff

Posted: **Thu Feb 28, 2008 11:00 pm**

jefferson wrote:Are those fog lights the factory units that replace the turns under the bumper?

Jeff

They do mount in the bumper, but maybe I'm wrong and they aren't fogs? I know the front corner lights had turn signals in them, so figured the ones (clearish) in the bumper were fogs.

Posted: **Thu Feb 28, 2008 11:05 pm**

On the 91 the corners were just marker lights and the turns were under the bumper. If you got the factory fogs then there was some work to put the turns in the corners. Do you have a fog light switch on the dash?

If they are truly the factory fogs I will take them along with the switch.

Let me know.

Jeff

Posted: **Fri Feb 29, 2008 9:48 pm**

Gristle wrote:
boro wrote:does the rack have inner tie rods that are in good condition?
They seem to be in good contition - there was no slop in the steering wheel. If there's something else you want to to check let me know.

Can you get me a shipping quote, if youa re willing to ship it. 63043.

Thanks!

Posted: **Fri Feb 29, 2008 10:25 pm**

jefferson wrote:
If they are truly the factory fogs I will take them along with the switch.

Let me know.

Jeff

Couldn't find a fog switch on the dash, so they must be signals, sorry.

Posted: **Fri Feb 29, 2008 10:27 pm**

boro wrote:
Gristle wrote:
boro wrote:does the rack have inner tie rods that are in good condition?
They seem to be in good contition - there was no slop in the steering wheel. If there's something else you want to to check let me know.
Can you get me a shipping quote, if youa re willing to ship it. 63043.

Thanks!

Looks like around $25 ~ $28 for UPS Ground.

Posted: **Sat Mar 01, 2008 12:11 pm**

you still have the passenger side fender? any rust and any dents ?

Posted: **Sat Mar 01, 2008 2:51 pm**

as the saying goes if you were closer,

anyway was looking for a motor, just the cost of shipping would be to great.

be well, bepa

Posted: **Sat Mar 01, 2008 7:48 pm**

Gristle wrote:
Looks like around $25 ~ $28 for UPS Ground.

When ever you're ready then.

Posted: **Sun Mar 02, 2008 2:34 pm**

If you've still got the car I might be interested in the Brake Master Cylinder if it doesn't have too many miles on it.

Let me know!

Posted: **Sun Mar 02, 2008 11:08 pm**

I will take the RF fender if there is no rust!

Posted: **Sun Mar 02, 2008 11:09 pm**

also, if it has abs, I will take the pump. it its non abs I will take the propotioning valve.

Posted: **Mon Mar 03, 2008 5:05 am**

BAC5.2 wrote:If you've still got the car I might be interested in the Brake Master Cylinder if it doesn't have too many miles on it.

Let me know!

I do have the brake master, but have no clue as to how long it may have been on the car. The car has around 160k miles.

Posted: **Mon Mar 03, 2008 5:06 am**

Ej22TIM wrote:also, if it has abs, I will take the pump. it its non abs I will take the propotioning valve.

It's an ABS car. You want the big 'ol pump/distribution block thing? How about $35 plus shipping?

Posted: **Mon Mar 03, 2008 5:07 am**

Ej22TIM wrote:I will take the RF fender if there is no rust!

Looks pretty rust free. If you give me an email addy I can send you pics.

Posted: **Mon Mar 03, 2008 6:18 am**

Any chance you still have the pressure sensor mounted on the passenger-side strut tower?

Posted: **Mon Mar 03, 2008 6:24 am**

vrg3 wrote:Any chance you still have the pressure sensor mounted on the passenger-side strut tower?

The MAP sensor? I may have given it to the guy who purchased the engine. I'll check tomorrow.

Posted: **Mon Mar 03, 2008 6:25 am**

Yep, the MAP sensor. Thanks for checking.

Posted: **Tue Mar 04, 2008 8:21 am**

Hi, do you have a passenger side front control arm? I bent mine from hitting a snow buried curb at a mall..

also do you happen to know if the control arm off your car will fit a 90 NA wagon? I'm betting it will.

anyway please PM me price, availiblity and if you can ship it to Canada. Thanks!

Posted: **Wed Mar 05, 2008 12:03 am**

Bumpo and all PM's answered ( I think!)

Posted: **Fri Mar 07, 2008 8:35 pm**

Bumperooni for Friday. Also added more parts to the list.

legacycentral bbs

Last chance Parting out '91 Legacy Turbo SS

Last chance Parting out '91 Legacy Turbo SS

good luck