Page 1 of 1
WTB for 90' AWD 4EAT: TCU, Drive shaft, shifter, and cable.
Posted: Fri Feb 29, 2008 6:14 am
by bean
Hi guys,
As you can probably tell by the list - front u-joint let go and hammered the shifter and the cable.
So I'd like a good used ones to replace all three if possible, along with a TCU. (I'm still getting some binding after replacing the duty solenoid. It's intermittant, and the LSD additive helped, so I'd like to try a known good TCU to see if I can get rid of it completely.)
Shipping would be to S4N 2J9, Regina, Saskatchewan.
Thanks!
Rabin
Posted: Fri Feb 29, 2008 6:47 am
by AWD_addict
I have 2 TCUs: one from an NA and another from a turbo wagon. I also have a 4EAT shifter assembly in gray. Might have a cable too, I'll have to check.
All worked fine before they were removed.
PM me an offer.
Posted: Sat Mar 01, 2008 1:35 am
by Matt Monson
I've got a TCU from a '91 SS. You can have it for the cost of shipping to Canadia and $5 for my time to run it to the post office...
Posted: Sat Mar 01, 2008 3:24 am
by tahiti350
Sorry, used the driveshaft, cable and shifter from my parts car for the same reason... I do have a TCU, but it's still in the car.
Update
Posted: Sat Mar 01, 2008 7:14 am
by bean
I frantically made calls to the wreckers around here without any hope of finding anything - but managed to find a 90K mile 92' SS. He'll match the price of the drive shaft ($175) off car-part.com - but I gotta pull it. Tempted since I get to see it and test u-joints to make sure it's good before buying - and there's no shipping hassles. (I'm guessing it'll be a pain for one of you guys to package and ship it) Unfortunately the car is frozen in an ice drift and it wasn't looking like we could get it out in time today.
So I just worked on my Legacy to assess the damage. (When it happened I assumed the shifter was smashed beyond repair, and that I'd be pounding the tunnel down!) Turns out I can likely fix the shifter by just bending the cable arm down, and get away with a shift cable to run it 2WD for now.
I'm going to price a new cable out to see if I can get the car going ASAP...
Thanks very much for the offers of parts so far, as it's most appreciated! I had virtually ZERO hope of finding parts from previous experience and just lucked out finding one local!
There's a couple guys parting cars that have also offered the parts at great prices - so if it falls through here I'm still set - so thanks again!
Rabin