legacycentral bbs

so I have rediculous amounts of air coming out of my filler tube for some reason ,and i think my rings or shot (or hg leaking into oil passages? Its a lot of air so I doubt it) so time for a new engine I guess. Anyone have an EG33 w/ ecu or EJ22 block w/ heads still on for cheap in the pa area?

Those are two VERY different motors. I am curious as to your request for both. Swap?

Strange request i know, but since i bought the car i wanted to do a eg33/5sp swap and engine's about done so im looking for a 22 to hold me over till i can find a real low miles 33 or just go with a cheap 33 if i can find it

is the eg33 out of the svx?

yeah it is

i have a ej22 w/ 209k and leaks oil

You are going to get into alot of custom work trying to get the 33 in there. The best Subaru tech in our area just bought a rhd postal wagon and had the engine out of his svx to do a 5 spd swap. He wanted to see how much would be involved and he decided against it. The crank pulley was right against the ac condenser. He bought a twin turbo to go in the postal wagon.

I think the 33 swap has been done before. Some searching may get some results. The 3.0 is shorter and would fit better, but i bet you will pay more for it.

Jeff

the 3.3 is a closed-deck block just like the 2.2t.
It was built for boost, both the concept and production testing model had two turbos on it. They couldn't develop a tranny that would handle the torque without huge R/D costs, which would defeat the ability of making the cheap ferrari killer they hoped for. My new dream project is taking a 3.3, mating it to a sixspeed PPG box, and dropping it in a SS.
It can be done, and there is a well documented swap into the GC chassis, which, as far as I'm concerned is the same as my chassis.

it being a bitch to do and not common at all is really the point of my wanting to do it... as well as being a sucker for n/a power, and the svx sound. i've seen firsthand a 96 wagon swap, although with a 4eat, and with stripping everything uneccesary and using a smaller radiator, moved forward a bit, w/reverse fans, the pain in the ass part will probably be with re-wiring everything. i would also like the ez(?)30 a hell of lot more, but chances of finding one in the 5-800$ range are pretty much 0 (unless someone has the hookups)

but i might just be retarded. someone talk (or deal?) me into something easier

Arctic Assassian wrote:the 3.3 is a closed-deck block just like the 2.2t.
..............

No, it's open deck. It can still handle boost and any Ej22t piston will drop in.

http://www.sdsefi.com/air46.htm

Towards the bottom you cn see a picture of the bore and if you look close it's clearly open deck.