Page 1 of 1
Some adjustments, and which Grill??
Posted: Mon Apr 28, 2008 6:15 am
by smh0101
So I did a few minor things to day...
Including install the new grill... But I dont know which one I like better the stock one...
OR THE New JDM aftermarket mesh grill.
Which one guys? I honestly am leaning towards the stock one.
(Not planning on selling the JDM one so dont ask)
I also moved the fogs.
From here:

To here:
And I colored teh guage needles... Purple Permanent Marker to make them red.
Some camera and foot work:
So which grill guys??
Posted: Mon Apr 28, 2008 6:36 am
by TheSubaruJunkie
Definatly need to keep the stock grill on there.
And since you wont be using the JDM. I'll be nice enough to buy it from you

Posted: Mon Apr 28, 2008 6:41 am
by smh0101
Gah!! I already said I aint selling it...
I may mount some driving lights in it.
Posted: Mon Apr 28, 2008 11:14 am
by shtbxr22
stock, w/ no fogs. just an opinion.
Posted: Mon Apr 28, 2008 2:28 pm
by PhyrraM
Grill...your choice.
Fogs..Stock location, but push them back further into the hole.
Posted: Mon Apr 28, 2008 3:20 pm
by Dynamic Entry
TheSubaruJunkie wrote:Definatly need to keep the stock grill on there.
And since you wont be using the JDM. I'll be nice enough to buy it from you

Ha. So manipulative.....
Fogs are much better where you put them.
I am surprised there is a debate about the grill. Mesh one is a clear choice for me.
Have fun!
Posted: Mon Apr 28, 2008 4:31 pm
by Arctic Assassian
I'm not a fan of 92+, but the stock grill looks cleaner than the mesh. Maybe its the "subaru" badge, I think it is too big. Put "turbo", or god forbid, STI in red. If you could find an RS-RA badge, that would end it all.
Posted: Mon Apr 28, 2008 4:35 pm
by Fkyx
The round fogs look rather hokey... They would look better further back in either spot.
Keep the stock grill!
Posted: Mon Apr 28, 2008 4:53 pm
by smh0101
I'm going to replace the fogs with JDM Fogs when Drew gets another set... until then I'l just gonna live with them.
And I think the stock grill looks cleaner to... I dunno...
And I believe I may be murdered if I were to put STi in the grill... rice rice baby!
Posted: Mon Apr 28, 2008 7:37 pm
by asc_up
Yeah. I think if you can push the fogs back into the stock location a little further it would look better.
As for the grill, I like stock, unless you could do what Arctic said and get an RS-RA badge or even like an AWD badge.
Posted: Tue Apr 29, 2008 4:05 pm
by Redlined
You Like the stock one, and you can send the JDM one to me at
OUTFXD C.O. Dave
3542 electric avenue
Portland OR 97218
(Thats a joke son)
Edit (LOL TheSubaruJunkie Beat me to it! where did you get the JDM one?)
Posted: Tue Apr 29, 2008 4:57 pm
by smh0101
Nice... I got it from dscoobydoo... he had tried to paint it for his car but couldnt get it perfect... and I happen to have access to a dealership body shop!!
haha! $20 to be painted... and the paint is perfect.
Posted: Tue Apr 29, 2008 5:07 pm
by the_watts10
personally i have know clue what these guys are talking about but that non-stock grill looks bad ass
Posted: Tue Apr 29, 2008 9:15 pm
by ericem
lol your car looks so funny everything is mis aligned.
Posted: Wed Apr 30, 2008 5:55 am
by smh0101
that would be the picture angles... all is fine
Posted: Thu May 01, 2008 4:23 am
by New92
Funny looks like I have the exact same fogs in the same spot you moved them to. As for the grill, Im making my own and it looks damn near the same as yours. So you know my vote.
And for all you guys offering to buy his, as he said not to bother asking and as the cost for the real deal is about $100 and I only spent about $15 building one that looks just like it......build your own the badge was the most costly piece of the whole deal.
Posted: Thu May 01, 2008 4:35 am
by smh0101
Um... total cost was a grand total of $40...
20 for the grill and 20 for the paint.
And NO work done at all. It would have taken me at least 3 hours to build one that looks like I would want it to... So instead I spent those 3 hours at work making 8.07/hr... so thats $25 at work... so $40-25 = $15
So in reality... mine cost well... the same as yours.
I'll probably do some stuff with this one...
I was thinking using aluminum mesh then like a Subaru logo off a tribeca in the middle.
Posted: Thu May 01, 2008 4:39 am
by New92
Wow, good deal. Best Ive seen was a hundred shipped from overseas.
Posted: Thu May 01, 2008 10:12 pm
by Redlined
Building one is out of the question for me. I am NOT a bodyman. (( as i, my bondo skills R teh sux ))
Is there a place to order these from over seas?
Posted: Fri May 02, 2008 3:46 am
by smh0101
Not that I know of. I got mine from dscoobydoo