legacycentral bbs

As the title states, I have a black rolled 92' SS, 4eat, that I'm parting out. It appears to have rolled starting at the front driver's side corner moving towards the rear passenger side.

Everything worthwhile is for grabs except - motor, tranny, ECU, wire harness, boost solenoid, MAP sensor, power antenna, brakes (MIA), and gauge cluster

The rear fenders are really the only body pieces that aren't banged up, the trunk is and rear bumper are in decent shape. The top wing is untouched but the paint is peeling/oxidized pretty badly neccestating a paint job.

Other things available -
like new engine cover
passenger corner light
passenger power mirror
TCU
assorted sensors
good front grill
rear open 3.9 diff
AT main driveline
front and rear sways with mounts and endlinks
VF11 with minimal shaft play
stock exhaust - any component/s you want
alternator
Calsonic AC system - compressor, condensor, lines, etc.
heater core
blower unit
standard HVAC controls
rear tail lights in good condition
sunroof controller
window motors
misc. switches

I will get some pictures posted up this weekend.

Please feel free to make me some offers, I don't mind cheap but try not to lowball me too much . If there's anything I didn't list but you would like to know about - just ask.

Thank you.

How much for the sunroof assembly?

The glass is toast and I'm not sure if I'd trust the tracks. I don't remember off hand if they were visibly kinked/bent but I'm not sure if I garranty them to be straight right now. I'll pull them down this weekend and take a look.

The open/close/up switch is missing because I swapped it with mine whose 'close' button is intermittent.

So I really only have the motor and the controller unit. So for that much hardware, $40 and shipping?

If you're still interested let me know and we can go from there.

Sending PM

Sunroof controller unit pending.

Hey Im in Spokane.....Just wondering where the car was located,maybe i could stop by and take a look.

oh..and how are the front fenders, the hood and the passenger doors??

The driver's side front fender is toasted. The passenger's side is 'okay', slight bend right at the bumper. The hoodscoop is actually in great shape, unfortunately the plastic that holds the studs still has stripped so it's going to be a PIA to get off. The doors are in decent shape for a car that rolled. The hinges are probably bent and the frame of the door itself is probably tweaked too.

I failed to get pictures downloaded from my friend's computer friday so pics will have to wait until Monday, sorry.

I appreciate your offer to come look but I'm going to have to turn it down. I will be happy to take as many pictures as I can though.

Have any interior pieces? I need a driver's side B-pillar plastic piece.

I'll check on the trim pieces tomorrow evening. Do you need the whole column trim from the floor to roof or just the top/bottom piece?

does your hood latch still work? if so how much would you like for it?

I almost bought this one myself...thought it might end up here.

If the turbo cross-member and dp are avl., please reply w/your price.

Also, the seats were kept inside the PO house...did you get them, too?


Have fun and good luck w/the sale!

92Wagon - you have a PM.

Wtdash - you have a PM as well.

skid542 wrote:I'll check on the trim pieces tomorrow evening. Do you need the whole column trim from the floor to roof or just the top/bottom piece?

I just need the top piece. Thanks.

Doh, I'm afraid that piece got broken pretty bad during the roll. Sorry.