Page 1 of 1
Tranny Inlet/Outlet Hose Size?
Posted: Sun May 25, 2008 5:53 pm
by Subaru_Nation555
It appears that my transmission inlet/outlet hoses are cracked and pending a road trip I want to replace them. Any idea what size I need? Will any radiator hose do? They're numbers 21 and 22 on the diagram. Will an auto parts store carry it? Thanks.
Posted: Wed Jun 11, 2008 2:47 pm
by Subaru_Nation555
Any ideas? I'm thinking just some generic radiator tubing but I need to know what size?
Posted: Wed Jun 11, 2008 6:06 pm
by Legacy777
Try to find something that you can use to take a measurement, go to the autoparts store and pick some hose that is similar.
A lot of auto parts stores have tranny cooler kits with hose or something you could use.
I'd recommend using hose that is good for oil service. Radiator hose may degrade over time in an oil type use.
Posted: Wed Jun 11, 2008 6:10 pm
by Hocrest
It's 3/8" ATF hose.
Any autopart store should sell it by the foot.
Posted: Wed Jun 11, 2008 7:04 pm
by Subaru_Nation555
Thanks for the replies guys. I picked up some 3/8th tranny oil tubing.