Page 1 of 1
IPD rear sway
Posted: Wed Jun 18, 2008 4:51 am
by subaru_styles
so last week i bought the IPD 22-24mm (iirc) bar w/ solid endlinks and urathane bushings at ralitek.
legacy fitament ? ---> fit perfect with minor hammering of that hump on the spare tire well. very resonable setup for under the $200 mark.
Posted: Wed Jun 18, 2008 5:20 am
by ciper
Pix or it didnt happen.
I'm considering a similar modification. What if you took a piece of 1x6 and jacked the rear of the car up with it under the hump? Should bend it uniformly and look "stock" right?
Posted: Wed Jun 18, 2008 5:22 am
by subaru_styles
you can see the bar barely hit the hump.. so just a few wacks to create some clearance was needed
Posted: Wed Jun 18, 2008 8:35 am
by jamal
nice. I tried a 20mm wrx bar awhile back and there was no way I was going to be able to pound that bump out of the way.
Posted: Wed Jun 18, 2008 4:45 pm
by Arctic Assassian
AWESOME!!!! I just got all the shit I need except for the bar!
Posted: Fri Jun 20, 2008 7:02 am
by Kelly
Oh yes, Ive pounded many of humps to get that bar to fit.
BFH.