A year's work has paid off...
Posted: Fri Aug 08, 2008 5:33 am
...on the aluminum oil filler neck I bought from Mr. Matt Monson about twelve months ago. Slowly putzed with it on and off whenever I was bored. The surface pretty much looked like that of an intake manifold. Lots of filing, sanding, and more sanding up to 1500 grit finished with about 15 minutes on a buffer.
after 320 grit
Then polished
It gives me a little more reason to get these EJ25D heads on that are collecting dust on my workbench. Not until after I see what I can do with the 900cc injectors on the old heads though.
after 320 grit
Then polished
It gives me a little more reason to get these EJ25D heads on that are collecting dust on my workbench. Not until after I see what I can do with the 900cc injectors on the old heads though.
